Modified Toaks 750 Titanium pot With and W/O handles Kits

Dan I hate to be a pain, I signed up for the 550 without handles but would rather do the 750 without handles if that’s possible.

Dan,

As we discussed, I would like:

Custom Lite Trail Cook Kit (Trail Designs Ti Caldera Cone – Modified Toaks 750ml Pot – without handles – Ref. (POT-750-NH) – modified with a ridge in the pot).

I am not interested in the Brian Green Esbit Tray with no leak bread pan corners – Esbit stove bits (i.e., stove, fuel, etc.).

Would like the “Improved” Modified Starlyte Burner for Caldera Cone with lid.

Would also like the fuel bottle (1 fluid oz) with turret dispense cap.

Let me know if you have any questions about the request/order.

Thanks Again,

Steve

Dan – Is the 750 is the same diameter as the 550 and 650? Is the ridge 1″ from the bottom? Can I order just the pot since I already have your previous offering? If so, sign me up!

Thanks – Russ

Russ, yes they are same diameter and the ridge is 1″ from bottom.

Yes, you can just get the pot.

Just throwing my generic in my request in the proper thread. I would like TWO kits with the 750ml pot withOUT handles. Not sure I have need for the alcohol portion but might be cool to have so I’ll wait until I hear from you and obsess (i mean decide) in the mean time.

It will all work out after Christmas :-)

I’ll let this sign up sheet continue till December 26, 2016

I am in for 750ml without handles alcohol set-up. I’ll post in the other thread too.

Cheers.

Toaks 750

Shawn Peyton kit

Jorge Villalobos kit

Joe Medlin 2 kits

M Compton kit/alcohol only

Matthew King pot only

Christopher * kit

Russ W kit

Richard Scruggs kit

Steve M. kit/alcohol/fuel bottle
Russ W pot only

Toaks Pots and Caldera Cones have been ordered.
When I receive the Toaks pots, I will contact everyone to begin assembly of kits and to get your email address for paypal invoices. A free “low volume” dispense cap that fits yellow bottles of “HEET” will be included with kits.

Thank you to all that have participated in this offer.

A Happy and Healthy New Year to all.

Pots and Cones arrived today.

Everyone that signed up has been sent a message to email me concerning their kit. Invoices will be sent once I receive an email response.

Dan

Update:
A rare occurrence has come about….Trail Designs sent the wrong Caldera Cones.

The correct ones are in the mail and should arrive this coming Saturday.

TD is extremely sorry for the inconvenience.

Got word from Trail Designs today that they sent it to the wrong address and is being forwarded to the correct one. If it arrives Monday, all orders will be shipped same day.

Is it too late to be put on the list for a 750 wo handles esbit only

Sorry Fred, not going to be doing these kits again.

Cones have not arrived yet. They seem to have gotten lost in shipment somewhere around Memphis, TN

If they don’t arrive by Friday. All monies will be refunded.

Question goes out to those of you that use the pot w/o handles.

How do you pick up a pot full of hot water?

Why did you choose the 750?

I’m working on some kits using a unique straight wall design and need to know if I should include the 750 w/o

Thank you for your input.

I use my buff and lift/hold the top edge. With the 750 I can leave plenty of headroom (easier to pick up and pour) and still have enough for meal and a small hot drink. I like tea or cider at night. It’s a good piece of kit Dan.

Cheers.

Thank you very much Christopher. Very helpful.

Someone emaailed me today asking about the 750 no handles. got me to thinking about them and how it would be to make up some kits if it would be worth while.

Pot grabbers/lifters…..does anyone use them?

I use a strip of carbon felt I got off some outfit called Zelph some years ago.

I too like the 750. Pots with ridges at a custom height to suit our personal stove systems would tempt me.

William, I ordered a few of the 750’s and will do some testing of the new windsheild/screen design.

I use mine for cooking in the pot and find the 750 to be the ideal size.  The rim is usually not so hot that I can’t lift it out of the screen/stand with my bare hand.  I really like this setup.

Thank you for sharing that with us. Do use ramen noodles as a base ingredient and then add tasty soft beef jerky :) or bacon ?

Pot grabbers/lifters…..does anyone use them?

I’m not sure if this was only directed at people who have your 750 ml, but I use the standard pot grabber like you pictured.  I typically bring a pan to fry in and a pot to heat water for multiple people.  Having one tool to hold all of them is quite nice.

Everyone is encouraged to let us know if they use a pot lifter all the time or just ocasionally.

I’m trying to decide if I will include a pot lifter with the next kits I make. The kits will be unique. The design will be directed towards the use of canister stoves and Esbit users.

This is the design I will be testing to see if I like the feel of them. Anyone use this type/brand?