Topic

Tent Pole Bed

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
PostedJun 12, 2010 at 11:36 am

The center pole of my mid kept sinking in loose dirt a couple of weeks ago in the southern Sierra. The Hex 3 pole fits perfectly into this cut-down, spray paint lid. My scale is not fine enough to register the weight.
Paint Lids
I used a pair of tin snips to cut through the plastic.
LidModified

PostedJun 16, 2010 at 5:03 pm

Yes, Ken, I saw yours or some other post re the kickstand plate but the one I handled was way too heavy. After touring Home Depot for some other possibility, I came home and the spray paint lid just popped out of nowhere.

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...