Anybody ever make a anything similar to this? Bivy from the waist down. Mid about 40" high from the waist up to allow for gear and space to prep. Seems like it could be light and very storm worthy.
Topic
BivyMid?
Become a member to post in the forums.
- This topic is empty.
I thought same thing too. But bivy requires waterproof breathable fabric in this design.
WPB fabric is heavy. So I don't think this way will be much lighter than light shelter(WP) + light bivy(not WP).
However this design has stormproofness better than tarp.
I'm not sure I see the advantage of this system. As Yohei pointed out WPB fabric is heavy. Also a WPB bivy's advantage is taking up small space and simplicity of set up. With this you are spending time setting up a pyramid same as you would if you used a regular pyramid and then taking up twice as much space as a standalone bivy or tarp would. Again, you might as well just set up a regular pyramid with a B bivy inside. If you are talking about a small shelter over the head of the bivy there are numerous designs that use that concept, including bivies by Integral Designs, Big Agnes, Black Diamond, Rab, and Nemo, which all have models with integrated head spaces. Using a small tarp over the head of the bivy is quite common, too.
May I ask why you chose a pyramid?
I made something similar about two years ago and have been using it since. Instead of being a square "mid" at the top it flares out from the middle to the widest point forming a diamond. The diamond extends about 2' beyond my 66" pad. In your diagram just turn the square 45 degrees to get the idea. It can be supported with a pole in the front similar to a tarp or tied off to a tree. It requires a stake at two of the corners of the diamond and a stake and pole at the front. I used some heavier waterproof nylon I got from w-mart. Total weight without stakes or poles is roughly 8 ounces. I have been very happy with it. When I get asked what it is I say it is a "tivy"; a combination of a bivy and a tarp.
Kevin, do you have pics by chance. I think we're on the same page.
Basically:
Half of MLD Alpine bivy= 5.5oz
Half of Duo mid= 8oz
So 13.5 oz for a solid,space saving and comfortable shelter.
This idea came about while laying in my TT Contrail. I realized that I never use the extra space by my legs. Then looking at my friends poled bivy and thinking that's not big enough to be long term comfortable. This idea would take up about 3/4 the space of a tarp/bivy combo due to not having to cover legs with tarp. Shorter and smaller mid design could provide better wind and snowload protection than a full size mid. I would use something like this when skirting the treeline in the cascades.
Just wanted to share my little idea to see what people thought.
The Tivy is out with my son who took it for spring break and it won't be back for a while to take pictures. But I do have the original drawing that I made the prototype from. The prototype was first made from a cheap shower curtain and then I made the adjustments right to the shower curtain and used it as a pattern. My recollection is that the following were changed:
1- Ditched bathtub floor because it was a pain for me to sew.
2- Kept assymetric design, but had to add about 2" ro the short side because it felt too "low"
3- ditched the additional loops where the bottom of the bivy sack ends. Would add one tie-out at the foot end if I did it again.
4- Added a mesh corner pocket to the point of the short side. This keeps a few thisngs handy.
5- Intended to, but never made the bug net for the front.

Become a member to post in the forums.


