I propose that we develop a standerd
wood burn test and multi-fuel test
for the different tri-fuel stoves on the market for the BPL commuty today.
I think that would be of great service to help to the end user to find the unit that would meet there needs.
Being a mfg I would be more then happy to work with others to come to that standerd.
Topic
STANDERD WOOD BURN TEST
Become a member to post in the forums.
- This topic is empty.
Pellet stove fuel? Is your stove a single wall design? Impossible to tell from photos on your site. Some errors in your text there too.
Wood, most wood stoves will burn any bio-mass (pellets,twigs, charcol, twisted grass, cardboard and dung)
If 1/4" kline dryed pine dowels where used cut to a standard length it would allow any user with basic skills to duplicate the results. It would also act as training wheels for the learner to develop there skills.
My stoves are doubled walled .
I was suggesting pellet stove fuel as a standardized wood fuel for testing.
Ken, I believe that there are too many different types of wood pellet fuel. Different types of wood, different sizes, etc. So, that would provide consistency only within one shop and wouldn't really apply to the next guy trying to duplicate the tests. If you standardized onto something kind of universal, like 1/4" pine dowel rods cut into 2" lengths (or something like that), then the next guy can apply the same fuel to a second stove test.
Real world wood fuel is obviously more random, and that would add a lot of uncertainty to test results.
–B.G.–
All the pellets I've seen for sale in CA seem to be a standardized size and shape. though materials used in them might vary slightly. I e-mailed the pellet fuel industry and am awaiting a reply.
1/4" dowels (small twigs) would duplcatie real world use better then wood pellets, also most folks would not carrey pellets in the field.
Also pellets burn slower longer then twigs or dowels because of the lack of air flow around the pellets caused by there size.
My stoves have always been doubled walled.
somewhere on the internet I saw somebody use wood clothespins with the wire removed as a standard wood for testing.
Oh how about these. Wood working dowel pins. Home Depot

Don,
Having a standard sounds good on paper, but it wouldn't really tell us which stoves perform better or cleaner with damp fuel or in windy conditions. All these stoves work very well with dry fuel on a calm day. And wood efficiency isn't of prime concern as it is with alcohol since we're not carrying it in our packs and the fuels are usually plentiful. Just my 2 cents, or maybe 3.
Gordon
Gordon;
Excellent points, outside temp, wind and wet or frozen wood. As well as the fire skills of the user all have a
effect on the end results. If there is a base line for the
end user to start from and duplicate. You can add to the complexitie of test standards as needed to provide the best information possiple to the end user.
Don, your idea of 1/4" pine dowels of a standard length is good AND this testing needs to be done.
Wet wood has WAY too many variables to do a good, repeatable test. So dry wood in a no-wind day at abrund 70F if possible.
Soak 50% of dowels used for fueling in water for 1 hour? Something like this could help give a standardized result.
Become a member to post in the forums.

