Topic

Tarp Stakes

  • This topic is empty.
Viewing 14 posts - 1 through 14 (of 14 total)
PostedMar 8, 2010 at 2:20 pm

Hey there-
I'm looking into getting stakes for my tarp. I was going to use 6 MSR needle stakes (10g each) however it now seems that I need 12 stakes for a proper pitch, and using the aluminum instead of titanium makes a difference in those amounts. I am interested in the 1/2g Terra Nova ti stakes. Has anyone used these before, especially on the PCT? They seem really great, but I dont want to break them or have them pop out ever minute. Should I order more MSR ones, or go ti?
Thanks!
Evan

>> Bender << BPL Member
PostedMar 8, 2010 at 3:00 pm

A standard 14 gauge bike spoke is the same diameter as the 1g version. This should give you some idea of how stiff they are. TI is going to be more flexible than steel at the same diameter. If I remember correctly TI is roughly 1/2 the weight of steel and 2/3 the stiffness.

PostedMar 8, 2010 at 11:29 pm

I use only aluminum MSR Groundhog "Y" cross-section stakes but with the TT Moment I need only 4 of them, 2 of which are used only if it's going to be very windy.

Groundhog aluminum stakes are THE toughest light stake I've found. There are copies but the MSR original is the best.

P.S. Take a couple of Groundhog stakes for the times when you need a good holding stake. Round or "needle" stakes are nearly worthless in anything but ideal soil,

Miner BPL Member
PostedMar 9, 2010 at 12:02 am

In most cases, adding a rock or log to the top of my 6.5" ti hook stakes does the trick. I've never had one pull out yet, even in 30-50mph gusts. Taking advantage of boulders,trees,shrubs,logs to tie your guy lines to also helps in the worse situations.

Roger Caffin BPL Member
PostedMar 9, 2010 at 3:43 pm

> adding a rock or log to the top of my 6.5" ti hook stakes does the trick.
> I've never had one pull out yet, even in 30-50mph gusts.

+1

Cheers

PostedMar 9, 2010 at 4:12 pm

Sounds good. I will use the 6 aluminum stakes I have plus titanium stakes to complete the package. Probably the ti stakes from GG. They all seem similar, but the terra nova skewers seem a little too flimsy. Thanks
Evan

Ryan Teale BPL Member
PostedMar 9, 2010 at 5:17 pm

I think two MSR Groundhog stakes for the high tension lines coming off the ridgeline would be a good call for their greater holding power. The ti skewers or needle stakes would be fine for the rest of the perimeter.

Ryan

Alex Gilman BPL Member
PostedMar 9, 2010 at 5:44 pm

These are great! I like to insert them just behind the ear of packers who are carrying much more weight so that as soon as they topple over, I use the hooked end to attach a guyout and use the corpses as anchors.

The good news is it's sustainable.

PostedMar 9, 2010 at 7:53 pm

Nice one Alex- Sustainable and I bet there are a million multi-uses for them. Too bad its so much dead weight (haha) :)
Evan

Roger Caffin BPL Member
PostedMar 9, 2010 at 9:00 pm

The corpses are OK – they will compost.

It's those acres of heavy gear left spread across the place that creates the unacceptable degradation of the environment.

Steak anyone?

Cheers

Viewing 14 posts - 1 through 14 (of 14 total)
Loading...