Topic

This Baby Burns!

  • This topic is empty.
Viewing 25 posts - 1 through 25 (of 27 total)
PostedMar 5, 2010 at 6:50 am

Yesterday I bought the new Evernew Titanium Ti Alcohol Stove and Stand DX Set and tried it out. And wow! this thing really burns, especially when using the Powerplate above the stove.

DX Set

DX Set Use

WIth just the stove itself this is what the flames looked like:

low flame

But when I placed the Powerplate on top, this is what it looked like (the flame stood a full 12 inches above the unit):

tall flame

I was very impressed. I think the Powerplate idea could easily be implemented on other alcohol stoves to up their power.

Jim MacDiarmid BPL Member
PostedMar 5, 2010 at 6:59 am

Very interesting, especially the wood-burning option. I like the idea of burning wood, but can't do it everwhere I hike, (or say a trip in the Sierra where you're in and out of no fire zones over the course of your trip) and can't justify owning one alcohol stove and one woodburning stove(in addition to my cannister and white gas stoves). The Ti-Tri would be a nice option except it is limiting in that you can't switch pots.

It looks like for wood burning you'd have to add your own Ti base to be LNT though.

Thanks for pointing this out.

Jesse H. BPL Member
PostedMar 5, 2010 at 7:01 am

that's awesome!

gotta be honest I got a laugh when I saw the IKEA utensil caddy being used properly… I've only seen it modified into a wood stove!

btw, please post your future reviews of this stove!

Jesse H. BPL Member
PostedMar 5, 2010 at 7:12 am

I'd also like to know

and what about your countertops?

my GF would kill me…

Nathan Baker BPL Member
PostedMar 5, 2010 at 7:15 am

Looks like an impressive, but pricey setup. If you happen to put it through the esbit/wood tests I would love to know the results. Thanks for posting Miguel

RL BPL Member
PostedMar 5, 2010 at 7:18 am

Would also love to see some fuel consumption tests.

Troy Ammons BPL Member
PostedMar 5, 2010 at 7:33 am

Guaranteed its going to burn a lot of fuel with the power plate.

It is basically super boiling the alcohol as the power plate reflects more heat back into the stove.

Impressive setup though.

PostedMar 5, 2010 at 8:06 am

Efficiency is the key to lightweight. If this thing burns thru denatured alcohol the way I burn through a bottle of scotch, it may not be a very lightweight option.

It already has a starting weight of just over 3 oz, so it had better be efficient! However, given the versatility offered with the wood burning option, it becomes more attractive for trips when I may be primarily at or below treeline.

For me the botton line is, will it ouperform my stove (coleman F1 ultralight) just under 3 oz, and a 13 oz (225g fuel) primus cannister – that is good for two people on a 3 day hike…..16oz total weight.

PostedMar 5, 2010 at 8:20 am

Whoa! I just got this thing yesterday, so please give me some time to get and try it! (^J^)/"

Guaranteed its going to burn a lot of fuel with the power plate.

Probably. The Powerplate is meant to be used when the alcohol is not burning well. Normally you'd only use the stove on its own. WIth the powerplate the stove burned 60 mg of alcohol for 10:45 minutes.

gotta be honest I got a laugh when I saw the IKEA utensil caddy being used properly… I've only seen it modified into a wood stove!

You made me laugh, too! I had completely forgotten about the IKEA utensil caddy!

and what about your countertops?

my GF would kill me…

Mine would probably murder me in my sleep if she had been home! Luckily the stove left no marks or effects. The countertop is made of steel and, according to Japanese fire safety law, is fireproof. So no worries!

PostedMar 5, 2010 at 10:32 am

We share your enthusiasm! If it performs as well as it appears to perform, we have a winner. Also, in the link to the PDF you posted, it says "Turbo Plate for better efficiency and Multi Fuel Purpose"

So, I'm hoping that it does just that and improves efficiency…..and it ends up being a great option to carry which is comparable or lighter than my current kit.

I'm hoping it will go on sale, or will be availble for say 25% off (hopefully, during some of the memorial day sales?). $88 is expensive. Before I'd spend that, I'd just need to know that it offers some good benefit. If it was $40, I'd probably buy one almost right away.

Please share your observations and enjoy!

PostedMar 5, 2010 at 10:46 am

It looks like for wood burning you'd have to add your own Ti base to be LNT though.

The Powerplate can be set both above the alcohol stove for added alcohol stove efficiency and at the bottom of the lower base as an ash grill for wood fires or a base to set the Esbit fuel tab on. Still you'd need something to keep the ashes off the ground for LNT.

Jim MacDiarmid BPL Member
PostedMar 5, 2010 at 11:07 am

The Powerplate can be set both above the alcohol stove for added alcohol stove efficiency and at the bottom of the lower base as an ash grill for wood fires or a base to set the Esbit fuel tab on. Still you'd need something to keep the ashes off the ground for LNT.

My LNT concern would be with leaving a visible burn mark on the ground. Ashes I can scatter.

It's heavier than a basic cat can stove, but I didn't find one of those to work very well with my narrow and tall SP700, and now I'm using a Trappers Mug. I need a pot stand, and I currently use a packafeather XL@1.2 oz. Add in my not UL windscreen scavenged from an MSR stove@1oz and the Evernew is only an ounce heavier, assuming no additional windscreeen is needed. For the flexibility of being able to burn wood, I think I'd take that ounce.

I guess it's expensive if you only plan on using it as an alcohol stove, but it you plan on wood or esbit burning, it's right in line with the price of the Ti-Tri, with the flexibility of being able to use different sized pots.

It it fairly sturdy?

I'm not in desperate need of a new stove right now, but this is fairly intriguing, and I look forward to more used feedback.

PostedMar 5, 2010 at 1:21 pm

I see no evidence that this stove, in woodburning mode, is the efficiency equivalent of the Caldera Cone Inferno which, like the BushBuddy, RE-circulates hot air for far more efficeint use of fuel and thus more heat.

My vote is still fo the CC Tri Ti W/ the Inferno conversion.

BTW, you CAN switch pots on the CC Tri Ti if you make a 1/4" mesh hardware screen that has bent edges on 2 sides to just fit over the top if the Cone. But that's just for woodburning.

PostedMar 24, 2010 at 9:43 am

I bought just the alcohol burner last week and it is a well made, trangia style burner. It has good capacity. I didn't do a formal test burn. I am waiting (scraping up the money) for the DX stove stand. I like the idea of the set up and function. In alcohol mode, with the turbo plate, it seems that not only do you have the heat from the alcohol passing through the turbo plate, but, as the plate traps heat, it radiates heat. Just thinking to myself here. But it seems it would make for an effecient burn. The burner is so well made and light. I'm not an ultralight backpacker. But I do like gear that is versatile. The titanium construction makes it virtually indestructable.

Ben BPL Member
PostedMar 24, 2010 at 9:41 pm

that looks crazy for an alco stove! Very interested to some test stats when you get around to it!

PostedMar 24, 2010 at 10:28 pm

I just got one in the mail. Along with both a 500ml and 900ml pot. Seems bomber. I'll be using it lots pretty soon. Heavier than my homemade kit though.

Lucas Boyer BPL Member
PostedMar 25, 2010 at 6:52 am

I really like the visual appeal of this stove: clean lines, compact design, appears to burn rather well. However, I don't see this as an improvement to the Bushbuddy or Cat Can, which could both be combined to provide the same effect and offer a true LNT wood burn option. Not to mention the thermodynamic efficiencies offered by the BB. The price is a killer too. I'd rather buy the BB and throw my virtually free cat can inside.

As for countertop burning, I tested a cat can burn on top of my microwave without thinking about the potential scarring. Luckily, it didn't even leave a smudge. Gotta love old faux-woodgrain metal microwaves!

PostedMar 25, 2010 at 7:20 am

I currently have a Trangia setup with a heavy brass burner. Is the Evernew burner the same size? Meaning, could I sub out the brass burner for this?

Fred Eoff BPL Member
PostedMar 25, 2010 at 8:38 am

The specs say the upper stand is 3.26" diameter. I would be curious to know what the combined collapsed stored dimensions are. This looks like it could be a slamdunk fit into my Snow Peak Mini-Solo set.

PostedMar 25, 2010 at 9:00 am

This looks like it could be a slamdunk fit into my Snow Peak Mini-Solo set.

That's one of the advantages of this stove set over the Ti-Tri or Bushbuddy… it packs down really small. Approximately 2.36" tall (slightly more because the base piece juts out about .25" at the bottom when the top piece is nested on top) by 3.26" in diameter, when everything is nestled together.

Fred Eoff BPL Member
PostedMar 25, 2010 at 12:29 pm

Fabulous! So all I need now is a 2' – 2.5" thick pancake alcohol container of about the same diameter dimension and one would have the shiznits of a nice setup!

Sunny Waller BPL Member
PostedMar 25, 2010 at 6:05 pm

I got lucky and found one Monday…should be here next week. I think I have forgotten every thing I know about about cooking over small wood fires which is what you did in the seventies..either that or sterno. HA. I also just purchased a Bush Cooker from Four Dog Stoves and was very impressed with the craftsmanship of it. I get to play with it in the yard this weekend. One of the main reasons I wanted a wood burning stove was the option to experiment with meals that take longer to cook than just your boil and bag meals I have been eating for the past few years.

Viewing 25 posts - 1 through 25 (of 27 total)
Loading...