Topic

Water Treatment – Hybrid Filter?

  • This topic is empty.
Viewing 4 posts - 26 through 29 (of 29 total)
Travis L BPL Member
PostedFeb 8, 2010 at 4:47 pm

Cool! That one seems to fit more snug than mine. I can't get the O-ring to go in. Slight differences in manufacturing I guess.

Franco, how long did it take to empty that Cantene?

Edit: I took the O-ring off, and it fits better, and doesn't leak. One thing I noticed is that I get a much faster flow if there's a long tube connected to it versus just the filter. Something to do with physics I think.

PostedFeb 8, 2010 at 5:11 pm

OK, this is what I had in mind..
Gravity filter 4

I will post a few pics in the DIY section.
Franco

"Franco, how long did it take to empty that Cantene?"
Two minutes and 5 sec for 1 liter (after an initial squeeze)
Inside the mouth of the Cantene there are two tiny "stoppers" (protruding plastic bits). Did you remove them ?

PostedFeb 8, 2010 at 5:32 pm

The Aquastar Muv is the lightest Uv device. Around 70g from memory. But I've had two that failed. The original version and the new version. So if it doesn't actually work, maybe it's not the lightest.

70g of useless plastic is heavier than 120g of plastic that does work.

My steripen sensors are overly sensitive, so I've switched to the aquastar plus bottle. Heavier, but it works and doesn't require 3 treatments to complete a cycle.

Travis L BPL Member
PostedFeb 8, 2010 at 6:16 pm

Yes, I filed them down. I have no idea why they're even there. Did you experiment with connecting a hose? You may get faster filter times.

Ben, I have to apologize. We lost track of your original post.

Viewing 4 posts - 26 through 29 (of 29 total)
Loading...