Topic

Glue for CF and plastic?

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
Here There BPL Member
PostedJan 16, 2010 at 5:49 am

Hey everyone,

I picked up a pair of BPL Stix during the gambler's sale, and unfortunately the first time I tried to put on/take off the baskets, the plastic piece that holds the basket on the pole came off (This was a little bit disappointing since it was within minutes of opening the package).

Does anyone have any suggestions for a good glue that would bond these materials well?

Thanks!

PostedJan 16, 2010 at 6:49 am

James,
PM "Sam Haraldson" for the solution. Or use the Help funtion, My Account. He doesn't read every post, but he sees every Help Ticket.

This has come up before, and whatever it is, it is commonly available.

PostedJan 16, 2010 at 7:09 am

5 MINUTE EPOXY will do the trick but make sure to use the two part system and mix equal amounts doesnt take a lot and it will be solid
you can get this at any automotive parts place or home depot but for me the best stuff i have found is at the local hobby shop as i fly rc planes and helicopters

good luck
kevin

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...