Topic

New Trangia-like Titanium EtOH Stove

  • This topic is empty.
Viewing 25 posts - 1 through 25 (of 27 total)
PostedJun 20, 2009 at 8:51 pm

"You can stand on it"

Why would you want to do something like that?

Ps: I didn’t see anything about the price?

Arapiles . BPL Member
PostedJun 20, 2009 at 9:22 pm

Given how effective the Trangia principle is I have been continually puzzled over the last 10 years:

(a) why Trangia didn't abandon the brass burner, since that was the single heaviest component;

(b) why someone else didn't do something similar, but not in brass – the caldera cone is the closest anyone has come (and is very similar to what I thought the simplest application of the trangia principle would be like)

Ken Thompson BPL Member
PostedJun 20, 2009 at 9:45 pm

No screw on lid is a deal breaker. Is it the same size, so I can use it in my Trangia sets?

PostedJun 21, 2009 at 9:00 am

I'd love to see a side-by-side comparison…dimensions, pictures, weights, etc.

Also, will the new stove fit other trangia-oriented windscreens like Clikstand or Westwind?

PostedJun 21, 2009 at 3:13 pm

Looks seamless. If so, that's a very nice piece of work in titanium. I want one!

PostedAug 22, 2009 at 11:56 pm

This shows the right direction, and yet. I think the absense of a lid and the inability to simmer are deal breakers. Without them, this is just another soda can. It now is Trangia's turn to show they can do better. I would suggest they also redesign the lid and simmer ring combination. Between them, these perform three functions (lid, extinguisher and simmer) that do not quite integrate because the simmer ring gets too hot to handle once you have actualy used it to simmer.

PostedOct 2, 2009 at 11:45 am

This became so ancient I almost forgot about it.

The main advantage of using the Trangia which cannot be imitated by other alcohol stoves is undoubtedly, the ability to store fuel. The construction of a lightweight Trangia is years overdue and will still be. This stove has the appearance of a Trangia but completely lack the concept of it. This concept, is ultimately the purchasing factor.

PostedOct 2, 2009 at 12:08 pm

I wrote to them to this effect, and they elegantly acknowledged, but gave no indication that they would do something.
So if this is what we all want, I think we should let them know. A titanium burner, with a lid and preferably a better simmer system.

PostedOct 2, 2009 at 1:16 pm

Not quite. What he was testing was the Evernew titanium burner that looks very much like a Trangia, but misses the crucial screw thread and lid.

Jason Klass BPL Member
PostedOct 2, 2009 at 3:24 pm

I have actually had an opportunity to test one of these. It works very well but (as already pointed out) it's heavy for what it is. Basically, it's an over-engineered Pepsi stove. If it had the screw top, that would help mitigate the weight for me.

PostedOct 2, 2009 at 4:44 pm

This may be a bit off topic, but has anyone else had problems with corrosion inside the burner from storing fuel for a week or so. I know you're not supposed to do this long-term, but it seems like a week should be reasonable. I already have some interior corrosion, which presumably is not a problem unless it is poison since one of the advantages to the trangia was that it combined my stove, fuel, fuel canister, hand sanitizer, and emergency painkiller all in one (I only burn 190 everclear, which is readily and cheaply available in the DC area). Obviously ti would solve any corrosion problem. Also, I contacted trangia and they advised that there was no lead in the brass they use and that the internal wick is cotton not fiberglass.

PostedOct 2, 2009 at 5:34 pm

ChimneyStove

Not exactly the same but essentially the same idea. This is put together based on Zelph’s Cobalt Stove that he posted here in the MYOG forum awhile back. The chimney replaces the chamber wall on this model and works well with a .9 Evernew ti-pot. Price and weight are nil.

PostedFeb 8, 2010 at 12:09 am

Hi Kyle,

I just got a Trangia Spirit burner. I was deeply disappointed by its quality. After lighting it once, the next day when I opened the lid there was a lot of debris on the bottom of the spirit well. When I poured out the meth and filtered it through a cotton plug it stained the cotton yellow and it was then that I noticed the blackish-green corrosion. This happened overnight on a new burner. I thought maybe the meth in India was adulterated or of bad quality (possible). I came across your post when I was searching online to see if anyone else had the same problem. I'm wondering whether it is real brass or just brass plating… seems a bit too light for brass!

PostedFeb 8, 2010 at 3:06 am

This stove isn't an exact replica in either form or function to a trangia stove. It has two sets of jets and a pot can be placed on top of it to simmer. Placing the pot on top blocks off the top set of jets. Its its own stove and undoubtedly it is not for some; but it is nice to see a new development. After all we can't expect all company stove builders to read our minds. As well the price is a bit steep but I suspect you might get what you pay for here. Either way I am still not sure if I am going to get one, I have enough stoves already, and I've always thought the trangia-style to be a heavy concept, simmer or not.

Here is a YouTube Video review

https://www.end2endtrailsupply.com/Evernew_Titanium_Alcohol.html

PostedFeb 8, 2010 at 11:05 am

Just as idle speculation.

I half wonder that the whole system is a kind of designed proselytism. It seems like Evernew is going to great lengths to make the whole thing bomb-proof. Of course what is one of the largest complaints about ultra-light/ lightweight gear…

What will all those multi-fuel stove users say when they are told that the Evernew Titanium Stove is both more rugged and more reliable. hmm…

they could also be targeting the new-to-backpacking crowd, since retailers can probably sell the whole system for around the same price as one of the larger multi-fuel luner-lander styled kitchen burner contraptions…

who knows….

PostedFeb 8, 2010 at 12:29 pm

This is total speculation in regards to Trangia, but if Trangia is subject to the same kinds of liability claims and/or federal/state safety laws that manufacturers in other industries involving flammable liquids and devices are, then I wonder if anything other than brass threads is an impossibility.

If you look at any pressurized flammable gas or fluid cylinders, i.e, acetylene, MAPP gas, propane, etc.,–and oxygen– you'll notice that the valves, regulators and threads are always brass; as are the torches and/or burners. That's because brass is soft enough that a spark can't be accidentally generated through abrupt contact or pressure in combination with another metal.

As remote a possibility as it may seem, with harder metal threads on the stove cap, there's the theoretical possibility of a spark being generated when threading the cap back on, and the theoretical possibility of that stove suddenly becoming a small bomb.

It may sound crazy, but my guess is that Trangia does not want to take any chances. Certainly no one in the welding/gasses industries would, or even could, legally.

Then again, I may be completely off base.

PostedFeb 8, 2010 at 12:39 pm

I am pretty sure that Trangia opted for brass because of the heat conductivity characteristics and did that well before the nanny state came about.
Franco
BTW, I think that the one Ben Soans was talking about is a Trangia copy, not the real thing…

Roger Caffin BPL Member
PostedFeb 8, 2010 at 1:12 pm

Hi Kyle and Benjamin

> has anyone else had problems with corrosion inside the burner from storing fuel for a week
Alcohol will not corrode any (likely) metal.

However, the range of the stuff they are allowed to put into denatured alcohol in America without warning the customer on the label is horrifying, and I am sure some of them could corrode the metal quickly. They can also leave very grotty residues after a day or so.

Cheers

Roger Caffin BPL Member
PostedFeb 8, 2010 at 1:16 pm

Hi Pieter

I suspect that you are looking for complex explanations where a simple one would do. It is quite easy to form ductile brass into all sorts of shapes – much easier than forming steel.

Cheers

Dale Wambaugh BPL Member
PostedFeb 11, 2010 at 7:56 am

I agree that brass was used for ease of manufacturing and Trangia dates back to the 1920's. See http://www.trangia.se/english/2933.the_company.html

I would say that the Evernew pot stand design shows promise as a multi-fuel rig. A cat food can or Gram Cracker would convert it for Esbit use. Evernew shows it in wood-burning mode at http://www.evernewamerica.com/EBY257.htm

The test I want to see is using the Evernew burner in a Caldera Cone.

Donna C BPL Member
PostedFeb 11, 2010 at 9:36 am

In looking at the picture posted by Rick linking to AAG, one of the photos shows how all 3 forms of fuel are used. It appears that the Esbit is placed on the mesh screen on the bottom of the stove, so no need for a Gram Cracker (sorry Rand!) or cat stove. I'm guessing the screen probably sits on those cross bars.

I still wonder if it needs a windscreen.

Viewing 25 posts - 1 through 25 (of 27 total)
Loading...