Topic

Jetboil Sol Titanium question

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
HeathP BPL Member
PostedOct 1, 2015 at 5:11 pm

I bought a used jetboil sol and the plastic piece on the burner is missing. I noticed that now the burner pivots a few degrees due to a slot in the bottom of the burner head. Is there a way to secure this piece so it is not loose anymore and does not rotate? Maybe with a piece of metal wire or something??? Here is a view of the slot. Can anyone help?Jetboil burner

Dean F. BPL Member
PostedOct 2, 2015 at 9:31 am

If you want to be permanent about it, use JB Weld.

PostedOct 2, 2015 at 10:27 am

JB Weld would do the trick – forever. I am not sure what function the plastic piece serves. I took mind off too but put it back together once I realized it wobbles without it. I don't use the burner very often opting for the BRS3000T instead. If I used the jetboil burner regularly, I would probably take the plastic off and JB Weld it.

HeathP BPL Member
PostedOct 2, 2015 at 10:28 am

What temps can JB weld withstand? I read 500 degrees F. Will that work? Jon, Here you go. Jetboil zoom

HeathP BPL Member
PostedOct 2, 2015 at 10:29 am

The burner head now pivots back and forth in that slot. I boiled some water with it like that and it was really unstable when putting the pot on and taking it off.

HeathP BPL Member
PostedOct 2, 2015 at 10:31 am

The plastic piece on the used one I purchased was melted because someone got it to close to a campfire.

HeathP BPL Member
PostedOct 2, 2015 at 10:35 am

I thought about getting some wire from the hardware store (solid core wire) and bending it in a u shape so that it prevents the head from pivoting but can be removed if I need to service it.

John Vance BPL Member
PostedOct 2, 2015 at 10:43 am

That looks to be a doable option. Wrap the wire around the ceramic post and through the holes in the c clip. On a side note, you scored one with the more durable threaded brass insert.

HeathP BPL Member
PostedOct 2, 2015 at 10:45 am

Thanks I did not know there was a difference! This one came all the way from Finland.

Viewing 10 posts - 1 through 10 (of 10 total)
Loading...