Topic

Bear Vault–can it drink in water?

Viewing 9 posts - 1 through 9 (of 9 total)
Paul Wagner BPL Member
PostedJul 21, 2015 at 8:27 am

On our recent trip to Mono Pass and Pioneer Basin, we had something happen that really took us by surprise. No, it wasn't the hailstorm that clobbered us right at dusk–although we had hoped we would miss that particular adventure. But it's related to that.

The next morning, when we got up and inspected the damage around our campsite from the hailstorm, we were surprised to see about a half an inch of water sloshing around inside our Bearvault.

Huh? The bear can was sitting away from our tent, in a small clearing among some trees, and it was upright the entire time—from before the storm hit to the next morning. So how did all that water get into the can?

All we can imagine is that the small lip on the bear can that sticks out beyond the lid was saturated during the rain and hailstorm, and that the can and its contents were relatively warm from the day's hike. As the contents cooled, they must have created a bit of a vacuum, and if the lip were saturated with water, maybe the vacuum sucked the water standing on the lip up through the threads and into the can. And that continued for some time, because the storm lasted a while, and the really cooled down everything–there was still an inch of hail on the ground when we woke up the next morning.

Anybody got a better explanation?

Jerry Adams BPL Member
PostedJul 21, 2015 at 9:36 am

I've had Bear Vault in rain without problem, very waterproof

Good thinking about temperature change. Hail would quickly cool the canister, right when there was water at the lip. But I don't think so. The canister won't be perfectly level, so one side would have water, but the other not. 1/2 inch? That's a lot of water.

Was there a hole in the lid or the canister?

Mystery like those rocks in Death Valley that move only when there are no humans around : )

Paul Wagner BPL Member
PostedJul 21, 2015 at 9:41 am

And the lid was on tight—clicked past the two tabs.

Can was upright, lid on top. I'd say it was pretty level. Very strange….

Bean BPL Member
PostedJul 21, 2015 at 6:08 pm

Sounds similar to what what happens to double pained windows that have lost their seal.

Donna C BPL Member
PostedJul 24, 2015 at 5:53 am

Maybe due to the change in temps, condensation built up inside, enough so that it puddled to the bottom of the canister. Just a guess.

Paul Wagner BPL Member
PostedJul 30, 2015 at 6:01 am

Sarah at BearVault was kind enough to respond to our recent questions about water getting into the BearVault during a storm. Here's what she wrote:

"There is a small lip on the BearVault housing which prevents a bear’s claw or tooth from getting under the lid during an attack. If the BearVault is almost perfectly upright then during a rain this lip can allow a small “moat” of water to form at the top of the housing. If the storm then passes during the night, the atmospheric pressure gets higher and this forces the water in the “moat” up the threads and into the housing.

To prevent this, just tilt the unit slightly during the night so that the water cannot accumulate in that “moat” if it rains- it’s that simple."

PostedMar 19, 2016 at 11:44 pm

I was going to say exactly what Sarah at BearVault said: water is forced up through the threads. Happens to me as well. I also have a BareBoxer, and it doesn’t have that problem. During a storm, I turn it upside down, everything stays 100% dry. Thanks for starting this thread, because I hadn’t thought about angling the BearVault to counteract the water issue. Much appreciated.

Viewing 9 posts - 1 through 9 (of 9 total)
Loading...