Three Piece Ti Nesting Pot/Mug/Bowl?

I think I have two of these bowls, one larger than the other and have not used them.  You say the 550 nests inside it?  Was that a 550 with or without handles?  I have the no handle version and can check them.  I don’t have the 900.  Let me know if you are interested.

There’s several kits with the bowl outside the pot, both of the ones I’m thinking of are taller and narrower.  Evernew makes one, and so does Snow Peak.  The SP fits a smaller canister and stove.  Not sure you could fit a mug in either with a canister, but you could probably find a larger pot to fit it all.

Hey Joseph. Here is a link to the 113, which I think is the larger one.
https://www.ebay.com/itm/184216144617

Probably the same item with a different logo

https://www.ebay.com/itm/183823460722

I have calipers and both of the Toaks bowls and a 550 mug if you need me to verify any dimensions.

or just buy Bob’s :)

@ Matt: I’ll take you up on that! Can you give me the diameter of the bowl (and throw the mug in to make sure it nests happily)? I THINK I actually the same bowl on the Toaks site (with handles now, which was throwing me off). Really, I just need to know if it’s the ‘bigger’ or ‘smaller’ bowl they sold at the time so I know what to grab.

@ Bob: My version had handles (the taller, ‘ergo’ style, like these https://www.toaksoutdoor.com/collections/pot95/products/pot-550-l), but either way, PM inbound.

To make sure I wasn’t crazy I did a bit of googling and actually found someone who had the same set up (timestamp: 5 min) : https://www.youtube.com/watch?v=OOgjH2YeBpc

Rough measurements of the outer diameter at the rims of these is 9.9, 10.4 and 11.1 cm. I’ll get out the calipers if you want tomorrow.

Here’s what I got…

Small Bowl
98.7mm ID
99.9mm OD Body
105.4mm OD Rim
49.6mm Height
40.4g Weight

Large Bowl
105.2mm ID
106.0mm OD Body
111.6mm OD Rim
46.0mm Height
39.1g Weight

Band
12.3g Weight

Amazing, thanks Matt!

Bob, shot you a note.