Topic

Temporary Patch for 7d down jacket shell?

Viewing 6 posts - 1 through 6 (of 6 total)
Stumphges BPL Member
PostedNov 6, 2026 at 2:11 pm

I have a hole in my Montbell Plasma 1000 parka, which I’ll need to wear in camp and to bed on a short trip coming up in a few days. No time to order a proper patch.

I’m thinking of using a small piece of 3M Micropore tape, which I think will seal fairly well and then remove without too much trouble later to make way for a proper permanent patch. Fancy jacket, so I don’t want to mess this up.

Anyone have a better idea?

Dan BPL Member
PostedNov 6, 2026 at 8:28 pm

Tenacious Tape patches seem to work very well and last a long time. Do you not have any?

Jerry Adams BPL Member
PostedNov 6, 2026 at 9:09 pm

Can you remove tenacious tape after the trip and replace with something more permanent?

Or could you just leave it on as a permanent fix?

I used tenacious tape on an air mattress.  It seemed to work. And then I removed it and replaced with patch and polyurethane sealant.  I think I could have just left it on permanently.  Answering both my questions.  Sort of. But that was an air mattress, not a 7d jacket.

David D BPL Member
PostedNov 6, 2026 at 10:18 pm

Sons t tape patch has been lasting for years on his well used puff

Terran BPL Member
PostedNov 7, 2026 at 3:56 am

My temporary painters tape patch has lasted 13 years.

Stumphges BPL Member
PostedNov 7, 2026 at 7:06 am

I don’t have any tenacious tape with me. I’m going to try painter’s tape and see how that goes. Should be easiest to remove later. Thanks, everyone!

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...