Topic

SLEEPING PAD…thicker?

Viewing 7 posts - 1 through 7 (of 7 total)
Sebastian O BPL Member
PostedApr 9, 2017 at 3:55 pm

Hi all,

So tried out my Sea to Summit car camping this weekend and I liked it a lot. But, I did have a little of your typical camping back discomfort throughout the night, but it wasnt a bad night at all, I only woke up a few times and overall woke up feeling very well rested the next day. (Maybe I should test again….?)

Or if more pad thickness = less back discomfort.??…. should change my current pad from 2.0 in thick to 2.5 in. thick? Will it make a big dif?Attaching a screenshot comparing the various S2S models. I have the one all the way on the left. It has a 3.3 R Value and weighs 1 lb. 3 oz. in my size.

Attached comparative screenshot

Thanks

 

 

 

Valerie E BPL Member
PostedApr 9, 2017 at 4:20 pm

I think you may need to play around with the level of inflation.  When I inflate my pad too much, I tend to get a backache.  During a longer trip, I get a feel for just how much “give” there should be for an optimal experience.

Roger Caffin BPL Member
PostedApr 9, 2017 at 4:21 pm

An R-value of 3.3 is not high, and on cold ground it could be ‘cool’.

Cheers

Cole B BPL Member
PostedApr 11, 2017 at 10:14 am

For strictly back comfort, I know I wouldn’t feel any difference between a 2″ and a 2.5″ pad, assuming I wasn’t bottoming out. Certainly not enough difference to warrant buying another pad after only one night of use.

R value is another matter. If you were cold enough that it took the fun out of the trip, it might be worth looking at a different pad, but I would personally try adding a thin CCF pad first.

Dena Kelley BPL Member
PostedApr 11, 2017 at 12:49 pm

Closed Cell Foam. It doesn’t transmit cold the way and air mattress will. I top my air mattress with CCF for additional comfort.

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...