NEW: MLD Carbon Fiber Pyramid Poles

Hi, Ron.  Thanks for this BPL Deal.  Had two questions —

First, will the CF Pyramid pole fit OK with a 2009 version of the Duomid even though that version has a smaller footprint than the new, larger 2017 version of the Duomid?

Second, how does the matched 4″ pole jack that comes free with the pole get attached to the extended pole since there’s a bungee cord running the length of the pole sections & attached to the caps at each end of the pole?

Do you remove the bungee cord when using the pole jack, and then rethread the bungee cord thru the pole sections upon removing the pole jack so that you can fold-up the pole?

Thanks for any info, and thanks again for making this deal available!!!

Richard

Then  new DM pole should work with the older DM.  If you find it a bit long then easy to cut off a few inches off one end.  Cutting info on product page.

4″ Pole Jack

For occasional use, remove the end cap on the main pole and slip it in – You would carry the 4″ jack detached.

If you want it that way permanetly then cut the bungee cord and rethread with new bungee including the 4″ jack at the end.

You can also make the 4″ jack a 2.5″ jack if that works better for you.