Topic
Become a member to post in the forums.
.
Hi,
I’m hoping to make a small gift for a friend as a surprise and I need to get a specific set of dimensions from a fully set up and tensioned MSR Hubba NX 1P tent and I only have access to the Hubba Hubba.
What I need is the dimensions between the ends of the poles at ground level along each side and corner to corner. I’m making something to aid her in fly first setup, and I’ll make a post in the MYOG section if it works out.
Thanks in advance for any help
Steve
I converted the first edition of the Hubba to carbon pole and silnylon to cut weight, but unfortunately do not have an NX, nor the original frabric panels on the first Hubba, which were probably thrown out.
But the NX is a mass marketed item, and you may be able to find one set up in a store and take measurements. Or you could just buy one, and do the conversion as I did. But that was a labor of love for a hiking companion.
Become a member to post in the forums.
New Ultralight GearSee the latest releases in ultralight cottage-brand gear from small makers.
© Beartooth Media Group Inc.
Loading...
