Topic

Attaching Cuben Fiber to VX-21

This topic has 1 reply, 2 voices, and was last updated 7 years, 1 month ago by brent driggers.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
Feb 27, 2017 at 7:28 am #3453084

simon b
BPL Member

@spbkaizo

I’m at a bit of a loss – for a rolltop on a backpack, am I better stitching the two materials, or should i attempt to bond them?

And, if I bond, any suggestions for how? Thin layer of epoxy resin? Cuben tape?

Thanks.

Feb 28, 2017 at 11:58 am #3453409

brent driggers
BPL Member

@cadyak
Locale: southwest georgia

I just did this very thing to my Seek Outside Fortress. I used a 1/2″ double sided tape along the binding edge and taped over that with a 1″ cuben tape. It has held very well so far. I just used it on an 8 day trip and really put it through the paces.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Loading...