Topic

ULA CDT Questions…

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
Steven Hall BPL Member
PostedJan 6, 2015 at 7:05 pm

Hello! Just got a CDT of the gear swap in the mail and it looks like a sweet little pack. There are a few things that I can't figure out though.

1. What are the two loops of yellow cord for on each strap?
2. Whats the point of the two velcro loops on the back of the pack by the top of the stretchy loop?

Has anyone ever turned it into a roll top? Was thinking I'd try that as I much prefer that to the drawstring…

Thanks!

todd BPL Member
PostedJan 6, 2015 at 7:17 pm

1. What are the two loops of yellow cord for on each strap?

These are for water bottles, and are my preferred way to carry water. Gatorade bottles, or others with a pronounced indentation, work best. Tighten them a lot to prevent the bottle from falling out.

2. Whats the point of the two velcro loops on the back of the pack by the top of the stretchy loop?

for an ice axe

I too, think that a roll-top conversion would be better. I've seen it done to drawstring packs before. Wouldn't be hard, use milk-jug plastic, or similar, for the opening stiffeners.

D M BPL Member
PostedJan 6, 2015 at 7:19 pm

Yellow cords are for drinking bottles, Velcro is to use with loops to hold ice axe or hiking poles on pack.

Steven Hall BPL Member
PostedJan 6, 2015 at 7:55 pm

Thanks guys! That makes sense…I probably cut them off as I don't use ice axes and don't like the bottoms on the straps.

I've converted an osprey exos to a roll top and it has a similar top so I'm gonna try it with these. Maybe i'll post some pics afterwards.

Thanks again!

PostedJan 6, 2015 at 8:12 pm

You can safely remove them without cutting them off if you wanted to use them in the future. Just need a knife or something thin to pry the plastic piece apart.

dirtbag BPL Member
PostedJan 7, 2015 at 10:41 am

I love the water bottle holder on my ULA CDT. So convenient and in winter kept it close by. I always used a smart water bottle there. .worked great. I tried to duplicate those holders on my GG G4 pack, but some reason it didn't work the same.

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...