Topic

Tent pole adjuster

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
PostedNov 13, 2014 at 8:06 am

Anyone use or have info or photos of the tent pole adjuster listed near the bottom of this link:

Adjuster

How does it work? Does it work? What does it look like? How much does it weigh? What is in my future? etc.

PostedNov 13, 2014 at 8:11 am

It's been almost a minute since I posted and still no responses.

Hmmmm, maybe if I added a riddle.

What do you have when you remove "tent" from "tent pole adjuster"?
A Polish chiropractor.

PostedNov 13, 2014 at 8:55 am

"What do you have when you remove "tent" from "tent pole adjuster"?"

Hmmm. You are actually surprised no one has jumped to respond to your thinly disguised plea to adjust your "pole".

All I can tell you is this is not that kind of site, and you couldn't pay me enough money to click that link.

PostedNov 13, 2014 at 9:06 am

Christopher,

Thanks for the feedback. I know I've gone too far when posters will no longer click my links. I guess it is a trust issue.

PostedNov 13, 2014 at 9:52 am

Im sorry.

I trust you.

I clicked your pole link.

On a serious non-chaffy note, I'll include a photo to help encourage answers. I know Doug I. had a RL Lone peak at the 2014 GGG so maybe he knows something about the adjustable pole segment.

I do not like having to adjust and re-adjust the length of my LT4s every night and again every morning to accommodate my shelter (particularly in the morning … I can never seem to get the twist lock to engage in the morning). I am interested in hearing replies about people adjusting Daryl's pole … sorry …. I said non-chaffy … It's a hard habit to break

Pole Adjuster

PostedNov 13, 2014 at 10:21 am

The end of the RL adjustable pole works thusly:

The bottom section of the main is a hollow tube. You slide a carbon rod (the adjuster piece) into it from below. The top of the adjustable rod has a threaded post on it (picture a bolt sticking out the end) that a thick rubber bumper slides over, with a washer and captured nut holding the rubber plug in place. Twisting the carbon rod causes the rubber bumper to get compressed by the captured nut and the rubber expands outward, gripping the inside of the lower section of the shelter pole. It works a little like the Leki twist-lock ski poles. The slightly finicky bit is that the rubber bumper needs to have enough friction inside the lower pole section to stick to the walls and not just spin along with the adjuster rod it is on the end of. You need to pre-expand the bumper a little so that it fits slightly snug inside the lower pole section.

I can take some prettier pictures of the system tonight if this is not clear enough.

PostedNov 13, 2014 at 2:33 pm

JP and Phillip,

Combo of words and photo pretty well explains it.

Christopher,
Your sourdough starter adjustable pole worked. Got me what I needed.

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...