Topic

Synthetic insulation stitching

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedNov 7, 2014 at 2:02 pm

I was wondering if the baffle-like stitching you see on some synthetic jackets serves any purpose. I've noticed it on MHW jackets and thought it might have something to do with Thermal Q needing to be stabilised. I've noticed that some companies do it with other insulation like PL1 (e.g.Patagonia) whereas others don't.

PostedNov 7, 2014 at 5:20 pm

It depends on what kind of synthetic insulation it is. Continuous filament insulation like Apex, doesn't need much, if any real quilting. More loose fiber fill type insulation like Primaloft does need it.

PostedNov 8, 2014 at 11:21 am

I've seen lots of Primaloft jackets that don't have it. Is there another, hidden way to stabilize it?

Mole J BPL Member
PostedNov 8, 2014 at 12:07 pm

I have reason to believe that of the companies using Primaloft 1 (Gold),

that, those who use 'narrow' baffles (as the OP describes) and sew right through to both shell layers, are using the Primaloft with the scrim removed (for lightness).

Whilst, those who just sew to one shell layer (apart from at the seams/edges!), at a much wider spacing (usually the liner IME (e.g. as on Rab Generator Jackets – which have a plain looking unquilted outer shell), have retained the Primaloft scrim and it is on the opposite side from the attached shell layer(i.e. usually the outer side).

Logic suggests that the former would be slightly less efficient as a garment due to lacking a more 'solid' unstitched through shell.

Manufacturers Advice for stabilising PL1 (Gold) was for quilting at 6" centres and for Sport (Silver) at 6" to 24" centres depending on thickness/weight.

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...