Topic

patching a down jacket

  • This topic is empty.
Viewing 9 posts - 1 through 9 (of 9 total)
PostedMay 12, 2014 at 3:18 pm

How do you folks patch a down jacket?

I keep, you know, forgetting to roll up the sleeves when I'm handling the stove. This has happened over and over.

Is it worth shelling out for the Tenacious Tape patches? Or can I just duct-tape it and be done? Some other product?

– Elizabeth

Stephen M BPL Member
PostedMay 12, 2014 at 3:23 pm

I use Tenacious tape, I just cut a circle patch off a roll.

PostedMay 12, 2014 at 3:28 pm

Hmmmm. So are the Tenacious patches identical materially to the Tenacious tape? The patches are just rounded versions of the tape?

If so, I'll do like you and definitely just get the tape. It's probably more cost-effective.

Bob Gross BPL Member
PostedMay 12, 2014 at 3:31 pm

Maybe you could get some Nomex patches sewn on to critical spots of the jacket.

–B.G.–

Stephen M BPL Member
PostedMay 12, 2014 at 3:38 pm

I have not used the patchs but I say a look on McNetts website may tell you.

PostedMay 12, 2014 at 4:22 pm

Never heard of Nomex patches. I'll look into it.

I have some other tape at my disposal, at home. Gorilla tape. Electrical tape. Etc. etc. Anyone know if the Tenacious Tape is significantly stronger than Gorilla tape?

– Elizabeth

Bob Gross BPL Member
PostedMay 12, 2014 at 4:28 pm

Nomex is the fireproof material that is made into suits for race car drivers and pit crews.

–B.G.–

PostedMay 12, 2014 at 4:38 pm

Tenacious tape has worked very well on my old down jacket, far better than duct tape would have.

Paul Magnanti BPL Member
PostedMay 12, 2014 at 5:14 pm

I've had better luck with Kenyon repair tape vs tenacious tape FWIW.

http://www.pmags.com/repair-tape-a-quick-overview

I seem to hold a minority view, but that is just me.
Though this guy from the AMC seems to have an opinion similar to mine:
http://equipped.outdoors.org/2013/04/the-best-nylon-repair-tape-gear-aid.html

Whatever tape you go with, *gently* iron it on with very low heat when you are done. I'd suggest rounding the corners as well.

Viewing 9 posts - 1 through 9 (of 9 total)
Loading...