Topic

New cottage quilt vendor: Mid-Atlantic Mountain Works and a review of their 20* Marcy quilt

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
Jeremy BPL Member
PostedMar 25, 2014 at 8:04 am

I recently purchased the 20* Marcy quilt from Mid-Atlantic Mountain Works. Mid Atlantic Mountain Works is a new cottage vendor based out of DC and run by a guy named Jared.

The inner and outer shell of the quilt is made from UL Argon(a tight weaved ripstop nylon) from Dutchware and comes in at .67oz per yard. It’s filled with 13 oz of 850 HyperDRY goose from Allied Feather and Down.

It’s 72”x50” with a half taper.

It’s 50” at the head and tapers to 40” at the foot.

Looks to have about 2.5” of loft

In its stuff sack, weighs 20.89 oz on my scale.

It has a drawcord footbox and uses Omni Tape(Velcro) to close up the footbox and has a buckle at the top to keep the footbox closed.



It has shockcords going up both sides starting at the foot box and come out at the head next to a neck drawcord and both go through a single cord lock on either side.

It has a grosgrain strap and center release buckle that goes around the back of your neck to keep everything snug and closed up.

The side shockcords act to keep the sides of the quilt tucked under you when cinched and it works pretty well.

Initial thoughts:
I was initially skeptical on how the quality was going to be since it was a new cottage vendor but I am super impressed with the quality of the workmanship. I haven’t found any flaws so far.

I’m 5’10” and it fits me perfectly. With my feet at the end of the footbox, the head of the quilt comes right to my chin. I bought this to use for hammock use and it works great. I should have gone with a wider quilt if I was going to primarily use this on the ground. I’m a side sleeper and toss frequently and 50” is just enough to keep me covered. It would be nice to have a little extra. Next time I buy a quilt I’ll get a wider one. Nothing to do with Mid-Atlantic Mountain works, as it seems most vendors are using 50” as their standard width.

First use:
I set up the hammock in the backyard with the Hammock Gear 20* Incubator UQ and an UQP. The temp snuck down to about 25*F and it worked great. I had to vent it a little because I was starting to sweat (I’m generally a hot sleeper). The side shockcords really do help keep the sides tucked under you when you sleep. I have no doubt I can sleep comfortably in lower temps.

Conclusion thus far:
It’s worth checking out for a reasonably priced quality quilt. I’ll update when I get more use out of it.

todd BPL Member
PostedMar 25, 2014 at 8:38 am

Nice review of your initial impressions and experience. Thanks Jeremy.

RE: the side bungy cords; do these shrink the edges length-wise? I am having trouble visualizing how these don't make it more uncomfortable so I'm obviously missing something. Do they run the full length of the quilt?

Thanks,

Todd

Jeremy BPL Member
PostedMar 25, 2014 at 8:44 am

The shockcords start from the top of the footbox. When tensioned a slightly it cinches around your body a little. Kinda hard to explain without seeing it I guess.

PostedMar 25, 2014 at 10:14 am

Jeremy,

Thanks for the info.

That Dutchware link you included has some cool hooks/hardware and accessories.

Jeremy BPL Member
PostedMar 25, 2014 at 10:27 am

Dutch makes some neat lightweight stuff for tarps.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...