Took the following setup on my recent trip. Worked really well. Conditions were windy, but note the short inner ring that blocks direct entry of wind from the lower vent holes. Boil times were speedy, so the setup works.
All of this (minus the Ti stakes) fits into an MSR Titan Mug with lighter, plastic cup, cleaner/scraper, and room to spare.
.
Regards the minor kerfuffle about the amount of bend on shepherd's hook stakes, notice the nearly STRAIGHT shank that works best for this setup. The pot stand is very stable, due to the super wide base. On the downside, it does need a piece of real estate that's flat to make it all work.
Am considering cutting a disc of Reflectix to place under the heat shield below the stove, to help isolate the stove a bit more. It could double as a minimalist cozy for just the pot's lid, too. (From what I've read, that's where the majority of heat escapes during off-stove cooking.)
