Topic

Integral Designs PLQ Jacket

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
PostedMay 15, 2007 at 9:54 am

Anybody have experience with the PLQ jacket?

I've tried a Patagonia Micropuff pull over (medium). But the loft was inconsistent on the jacket. Noticeably less loft on the right chest than the rest of the torso.

As far as sizing, the medium Micropuff fit well but I would rather have another inch in the arms.

Would have picked up a Cocoon Hoody but the delivery date (late June/early July) was too late for my needs.

Thanks in advance.

PostedMay 15, 2007 at 10:31 am

I had to return my e+lite when the flashing modes stopped working. I don't use the flashing modes, but figured that there must be something wrong with the electronics, so at that point I didn't trust the light.

EndoftheTrail BPL Member
PostedMay 15, 2007 at 11:11 am

I don't get it…

1. I thought this thread was about ID PLQ jacket???

2. If you have gear that's defective or whatever, why not return or exchange?

PostedMay 29, 2007 at 9:02 am

Bump, still looking for user experiences with the Integral Designs PLQ Jacket.

– Steve

Douglas Durham BPL Member
PostedMay 31, 2007 at 5:27 pm

I have the PLQ jacket, pants, Primalid hat and hot socks from ID. They are reasonably sturdy. Easy to put on and take off. Add 10-15 degrees of warmth when used in a sleeping bag.
For sizing go large, if the Micropuff medium was not long enough.
Douglas Durham

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...