Topic

UFK: unidentified fire kettle

  • This topic is empty.
Viewing 12 posts - 1 through 12 (of 12 total)
Dale Wambaugh BPL Member
PostedMar 27, 2013 at 1:21 am

I found this fire kettle today. Looks like a one-off by somebody who wasn't a stranger to metal work. Does the design ring a bell with anyone? Stainless steel, weighs 18.8oz, about 9-1/8" tall to the top of the lid and 4-1/8" diameter. The firebox is a cone starting above the bottom air vents. There is the lid, one pouring hole at the top and the Herculean folding handles.

UFK: unidentified fire kettle

UFK: unidentified fire kettle

UFK: unidentified fire kettle

UFK: unidentified fire kettle

UFK: unidentified fire kettle

Ben H. BPL Member
PostedMar 27, 2013 at 2:37 pm

My first thought was it is a backcountry boiler somewhere from there evolution, but it doesn't seem to match up:

http://www.theboilerwerks.com/about/

My guess is it is a one-off knock-off of the back country boiler… anymore back-story you can share?

Dale Wambaugh BPL Member
PostedMar 27, 2013 at 3:09 pm

"My guess is it is a one-off knock-off of the back country boiler… anymore back-story you can share?"

I found it in with the pots and pans in a thrift store!

PostedMar 27, 2013 at 4:21 pm

It does not look like a Thermette to me for several reasons.
All the ones I have seen were copper or painted tin.
This is the type I have used :
Thermette
Other differences are : you don't remove the top to fill and they don't have those round holes.
I will go with the DIY suggestion.

PostedMar 27, 2013 at 4:31 pm

See the Eco-Billy link. It's even proper Australian, not some imported stuff from New Zealand ;)

stephan q BPL Member
PostedMar 27, 2013 at 5:04 pm

Wow, BTS, (big thrift score). My wife used to wonder why i checked the cookware section. Sit by the river- see it all go by. stephan

PostedMar 27, 2013 at 5:07 pm

Oh dear, an Aussie product.
I had a look at the where can I buy, nothing familiar but now that I think about it, Australian Geographic a few years ago had several camping products and one of those was a kettle of this kind.
So it is possible that I had fondled one of them…

Dale Wambaugh BPL Member
PostedMar 27, 2013 at 5:15 pm

Thanks, Jan! How about that—a member in Germany found an item made in Australia for a member in Seattle. The mind boggles :)

There is no doubt that it is indeed an Eco-Billy. The small Eco-Billy is rated at 700ml and mine holds 600ml. A small variation in the placement of the inner cone would make it vary 100ml.

http://www.ecobilly.com/

I hadn't put any water in it until now to measure the capacity. The simple pouring hole works surprisingly well.

I wonder how it made it all the way to Seattle, and unused at that? I have a sea kayak from New Zealand– that is a lot bigger package.

Once a jolly swagman camped by a billabong
Under the shade of a coolibah tree,
And he sang as he watched and waited till his billy boiled:
"Who'll come a-waltzing Matilda, with me?"

PostedMar 27, 2013 at 5:47 pm

"Thanks, Jan! How about that—a member in Germany found an item made in Australia for a member in Seattle. The mind boggles :)"

Yes, it's the power of the silicon valley. Almost like magic, just more work.

Viewing 12 posts - 1 through 12 (of 12 total)
Loading...