Topic

Microspikes in packs

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
jim logan BPL Member
PostedOct 21, 2012 at 10:47 am

It's getting to the time of year to think about Microspikes. I refuse to carry them loose in my pack although they could lighten things by making holes and cutting down air resistance. For the last two years I have used a hard plastic Rubbermaid container, squarish, like a too-big sandwich carrier. It's the 5.2 cup/1.3qt./1.2l container and holds my XL spikes with little room to spare. It cost all of $1.99 plus tax. Still, I chafe at the rigidity and space consumption. The container weighs 3.3 oz./094 g. Anyone out there have a truly nifty carrying system that won't punch holes in packs, down jackets, wind gear, etc.? Thanks for sharing.

Stephen M BPL Member
PostedOct 21, 2012 at 10:52 am

I keep mine in a sillnylon bag and never have any issues.

Justin Baker BPL Member
PostedOct 21, 2012 at 12:11 pm

I gently put them in the side pocket. They aren't really that sharp. Unless you have a pack made from very ultralight material, it won't be a problem.

Aaron BPL Member
PostedOct 21, 2012 at 12:17 pm

Ditto on the side pockets. Mine are generally either stored there, or in the top of my pack with items that aren't likely to be punctured (stove, etc).

Dale Wambaugh BPL Member
PostedOct 21, 2012 at 12:37 pm

I have mine in a recycled potato salad container. No dirt, no holes :)

James holden BPL Member
PostedOct 21, 2012 at 12:53 pm

tyvek envelope …

if you dont have one of those fancy ultra thin packs you dont have to worry about it regardless =P

Todd T BPL Member
PostedOct 21, 2012 at 3:26 pm

I just plop them on top of my food bag, which is always at the very top of my pack. I think it would take some impressive pressure to push the spikes through any gear.

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...