Topic

Which size clamcleat?

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
Stuart Murphy BPL Member
PostedSep 27, 2012 at 4:38 am

For use with this cord?

http://www.exped.com/exped/web/exped_homepage_int.nsf

I want to be sure it doesn't slip. I guess the 1-3mm cleat would be best, but I favour the 2-5mm version in case I swap to thicker guys at some point.

http://www.clamcleat.com/cleats/cleats.asp?menuid=7

Experiences with these combinations of cord and cleats?

Is there any question that the smallest cleat would ever break? (I'm not talking about hitting it with a hammer or standing on it or something).

Thanks
Stuart

Roger Caffin BPL Member
PostedOct 5, 2012 at 5:00 pm

I use the smallest size clamcleat on my winter tent – and that has to take some extreme weather. I get them from the manufacturer in the UK.

You can damage a clamcleat by letting the string run through under tension. Basically, the string can melt the plastic by friction. You can also damage a clamcleat by massive overload, but you would never get those forces on a tent – the tent would rip first. But I have never seen any damage under normal use.

Conclusion: I do like them.

Cheers

Mole J BPL Member
PostedOct 14, 2012 at 1:45 am

I found that the 2 mini clamcleats I used on my Scarp side guylines ( 2mm ) had worn as Roger described and now slipped under fairly low tension.
This with normal use – not abuse- just 18 months of occasional use ( admittedly including a very windy 2 week trip in Scottish Hills and a very buffeted night high in the Lakes)

I replaced this particular pair of cleats. Will check the new ones during/after this winter.

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...