Topic

cutting a neoair large, does anyone know if you can cut the new Therm-A-Rest NeoAir XLite Sleeping Pad or xtherm?

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
Anthony Weston BPL Member
PostedAug 12, 2012 at 10:26 am

does anyone know if you can cut the new Therm-A-Rest NeoAir XLite Sleeping Pad or xtherm? And then reseal them with an iron like we could with the green neoair large?

Chuck North BPL Member
PostedNov 5, 2013 at 7:31 pm

Google anything and you might find an answer… .unfortunately, I found this thread after wondering the same thing! Personally, I'd like to crop about 5" off the length of a large Xtherm pad… thus re-sizing it from 77×25 down to 72×25. At 5'10, 175 lbs, I'm not a big guy but I find my elbows "fall off" the sides of the typical 20" wide pad when sleeping on my back. That extra 2.5" on each side of a 25" pad should solve the problem… that said, I don't need the extra 5" of length. As a backpacker, there is a weight penalty for going with the larger pad.. but that penalty can be minimized with a re-size. Since my goal was saving weight, I did a quick calculation … in the end a re-sized Large pad should weigh in at only 3.7 ozs more than the regular pad, giving a ~ 1.3 oz savings. REI has a very generous return policy but at $220 for a large pad I'm not inclined to break out the scissors without a proven re-seal plan. Your reason for returning?…. "Uh, I tried to shave off 1.3 ozs of un-used pad… and uh, it didn't work." REFUND Denied!

Harbor freight sells a number of Plastic Welders: http://www.harborfreight.com/catalogsearch/result?q=plastic+welder
This might possibly be the answer.. but at what temperature?

I'd love to hear if you find a successful way to cut & re-seal.
Thanks,
Chuck

pad size Sm Med Lrg.
L 66 72 77
W 20 20 25
wt oz 15 15 20
area/ sq in 1320 1440 1925
wt / sq in 0.011363636 0.010416667 0.01038961

remove 5" x 25" = 125 sq in
savings ozs 1.298701299

re-sized wt. 18.7012987

PostedNov 5, 2013 at 7:56 pm

There's at least one YouTube video that shows how to do it. Also, custom Google search the forums and you'll find what you're looking for. There have been several people who have done it and posted about it.

Diane Pinkers BPL Member
PostedNov 6, 2013 at 2:01 pm

Here’s the video I used to cut a conventional TAR Neoair down. The Xlite should be cuttable, have no idea about the XTherm.

video

edit: let’s try that hyperlink stuff again.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...