cuben monk tarp

If you're wanting to do center tieout, you will need 2 pieces of reinforcement material(70d ripstop nylon works good) cut in a circle of about 3in diameter. Pin one on each side of the fabric where you aim to put your tieout. Stitch the 2 reinforcements to your tarp material, then place your grosgran tab in the center of the reinforement patch and either bartack it, sew back and forth over it a few times or even zig zag stitch it a few times. The hardest part is sewing the circular patches without them bunching up or your stitches being crooked. I have found that if you put a thin layer of silicone glue (GE Silicone II or similar) on the patches and let them dry overnight before stitching; it makes for a much cleaner look as well as being easier to sew.

Hope this helps

Sean

I am planning on using cuben. Would I be able to cut circles and use hysol to bond them to the tarp? Would I sew the grosgrain loops to circle first and then glue it to the tarp?

Yes on using the Hysol and cuben circles. I'm not sure about how the tieout would hold not being sewn through all three pieces of cuben. I've only used cuben a few times and never bonded it. Hopefully someone with more cuben experience will chime in.