Topic

Closed Cell Sleeping Pad in ULA Circuit

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
Bradley Jay BPL Member
PostedApr 20, 2012 at 1:33 pm

I was wondering if anyone would like to share their experience using a closed cell sleeping pad stored inside a ULA Circuit. I want to switch to a closed cell pad but want to avoid lashing it externally.

All the best,

Brad

M B BPL Member
PostedApr 20, 2012 at 2:58 pm

Whats the concern? fold it flat and stick it in there. Now if you want to use it instead of stays, thats a different story. Whether or not it fits depends on your other gear and how much food you have.

Bradley Jay BPL Member
PostedApr 20, 2012 at 3:26 pm

I just wanted to know what others had experienced using different pads as not all pads pack the same.

PostedApr 20, 2012 at 5:41 pm

I use inflatables so I am only guessing here…
The Circuit tapers from the top to the bottom (the top is wider) so having the mat (like a blue mat) opened up against the wall may cause you to lose some extra space.
(by not fitting exactly against the wall)
The thinner mats (GG ThinLight) should fit better.
A folding type mat like the Z Lite (R size)is about 8 L in volume so about 20% of the inside of your pack without the extension, but that may rob you of less unusable space .
Franco

PostedApr 20, 2012 at 6:32 pm

I use a 3/4 ridgerest in my circuit, and although it does cut down on volume, I don;t mind because (A) it improves compression and carry quite a bit, and (:)

M B BPL Member
PostedApr 21, 2012 at 6:43 am

Ive used ridgerest, GG torsolites inside the circuit. Its just a matter of volume of your food and gear. Under 4-5 days food, if you are really UL with a compressible down bag, it should all fit. Because the bottom tapers , folding and putting flat against the back panel works best, you can get the pad all the way to the bottom of the pack.

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...