Grip-ifying my HTC Sensation

Sugru is a pretty fun product (http://sugru.com/). It’s non-toxic latex that you can mold on and then leave overnight to cure. I’ve used it with a fair amount of success.

Thanks guys, I've taken a look at both of those, in fact looked at Sugru prior to posting. Plasti-dip looks like a potential as long as I can smear it on thinly enough that it's worth the try. Sugru, I'm not sure I can actually apply in a small enough fragment to really preserve the slim size of my phone, as it is.

In summary, if I was going to accept adding some bulk to the phone, I might as well just get a thin silicone case. What I'm wanting to do instead is to apply a micro-layer of something rubbery. Maybe Plasti-dip is the way to go. Wish it could come in other colors.

Anyone have any comments on SilNet or SeamGrip?

Edit: looks like plasti-dip does come in other colors.

Even still.

not 100% sure of the name or if its still available, but there use to be a product around that was for use in bath tubs to make the floor non-slip if you had a shower over bath type set up. it was quite a thin, super sticky, inch wide grippy tape that came in foot long strips. you might try a local hardware or plumbing store. could be a less messy way to do it, nice clean lines, clear finish

You could always cross-hatch score it finely with the point of a knife – I do this for my slippy mini-bic lighters; works well.

"as long as I can smear it on thinly enough"

Do you need a thin layer over a large area or will smaller "dots" of Plasti-dip or Sugru work just as well?

Mike

Like you use on hockey sticks and skateboards. I use it on my firearm grips as well. Here's a website picked at random: http://www.noskidsafety.com/?gclid=CKqSg5SIka8CFWUaQgodB3QZyg

Get a replacement battery cover and stipple it with a soldering iron or use grip tape.