Topic

unloading tyvek

  • This topic is empty.
Viewing 9 posts - 1 through 9 (of 9 total)
PostedFeb 15, 2012 at 11:29 am

Ended up with way too much tyvek used for prototyping and pattern building. It is taking up space, and I thought I might feed it to the wolves. I have around 40 yards and it is a little over 7' wide (88.5"). This will make A LOT of ground cloths!
$1.5/ ft sound about right?

I'll fold it and ship USPS parcel post:
($6- $10 depending on quantity!)

or other if something is cheaper and you know works well.

I'll roll/ship, but will need to look into tubes for it, and will likely need one fold to fit into anything readily available.

Super interested in trading for heavier weights of cuben, 1" colored web (nylon), a webbing hot cutter, and xpac material…

Thanks!
JC
john@fromhighabove.com

PostedFeb 15, 2012 at 10:08 pm

Just so you know, it would be A LOT cheaper to ship it USPS parcel post, which is less than a dollar a pound I believe. The flat rate boxes are quite a rip off if you're shipping something light.

PostedFeb 16, 2012 at 7:52 pm

Great idea! I'll ship parcel post. I had a couple people who were interested, I suppose this changes my shipping rate a touch!

Thanks for the tip!

PostedFeb 22, 2012 at 9:50 pm

I'm sure there was no doubt around here, but I want to let people know that I picked up some Tyvek from John and I'm very happy. Get a ground sheet or two!

Viewing 9 posts - 1 through 9 (of 9 total)
Loading...