Topic

OR Versaliner Gloves

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
Velimir Kemec BPL Member
PostedJan 24, 2012 at 4:28 am

Hi!

FYI
Just got the information from OR about their sizing and they say
they run a bit snug in the liner glove and was adivsed to size up.

Cheers

NoCO-Jim BPL Member
PostedJan 24, 2012 at 7:36 am

Just a couple of data points Velimir, regarding the Versaliner sizing: my paw measures 9-1/4"(C) X 8-1/2"(L)..on the middle band of OR's size LARGE, and the Versaliner's "fit like a glove". They are skin-like, as you would expect in a liner, giving you dexterity to work with biners, zips, etc.

I use the Versaliners as a liner to a size LARGE on OR's Mt Baker Mod Mitts…and the Versaliner slips in and out of the Mod Mitts' PrimaLoft liner very easily. So it seems that OR's "large" size allows for "nesting" of the gloves.

With REI's return policy, you can buy both sizes, try them on to your comfort, and return.

Cheers,
Jim

PostedJan 25, 2012 at 1:03 pm

Hey James,
Are you wearing the Versaliner Gloves inside the Mt Baker Modular Mitts/Gloves with or without the Versaliner Shells? I am wondering whether the grippy dots on the Versaliner Liners would grip the fuzzy lining of the Mt Baker Modular Mitts/Gloves to well, and cause the Versaliner Liners to pull partialy off of the hand, when removing the Mt Bakers &/or make the Versaliner Liners finicky to put on, inside the Mt Baker Modular Mitts/Gloves.
John

NoCO-Jim BPL Member
PostedJan 25, 2012 at 4:54 pm

Without, John. Too few of the grippy dots to catch on the fuzz.
Cheers,
Jim

PostedJan 26, 2012 at 9:04 pm

Picked up a pair today in the basement (for $11 missing one of the fleece gloves). I am really impressed with them. Completely stripped down, weigh nothing, and fit over my rag wool gloves. I will use these for biking and hiking till the fall apart and I buy another pair.

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...