Topic

Anyone need some crisp Tyvek Home wrap?

  • This topic is empty.
Viewing 25 posts - 1 through 25 (of 31 total)
PostedNov 28, 2011 at 1:48 pm

I have a partial roll of 10' Home Wrap left from a home addition. I am using some for some prototypes and groundsheets but I would like to share with the MYOG crowd since I know it can be hard to source in small amounts.

Shipping can probably be done first class in a document envelope for cheap if folded tyvek is ok. If you prefer it rolled then the added price of a poster tube would be an added cost of course.

If you are interested feel free to chime in on this thread for a suggested price per linear yard (it would be 108 inches wide x how many yards or feet desired). Not looking to profit at anyone's expense per say, just paying for my time and hopefully few bucks to throw at some fabric for a project!

PostedNov 29, 2011 at 8:31 am

I'd be interested. Let me know a price and we can figure it out. Looking for 9-10 feet long piece. Thanks!

PostedNov 29, 2011 at 4:28 pm

Its already a 10' wide roll. So what width x length do you need? Pretty much, if it can be folded and fit in a document mailer I am fine with only charging 10 bucks for the material and shipping combined. $15 if a postal tube preferred. Does that work?

** I am only posting this here due to not being able to send a PM ***

PostedNov 30, 2011 at 6:30 am

paypal address is somemadhope82@yahoo.com. Just make sure to put size needed and any special instructions in the notes section (like if a document mailer is ok or postal tube prefered. A postal tube would still require 2 folds before rolling)

Sarah Kuhn BPL Member
PostedNov 30, 2011 at 9:10 am

Anthony – $10 on its way to you for 10 x 10 piece of Tyvek – folded is fine.
Thanks!!! Sarah

Gary Dunckel BPL Member
PostedNov 30, 2011 at 11:43 am

I'm interested in a piece 12 feet long. Will that fit in the envelope? Please let me know the price, and I'll fire off a personal (gift) PP payment. Thanks for making this offer to us.

(edit–I'm hoping for a 9' x 12' piece)

PostedNov 30, 2011 at 12:22 pm

A lot of response on this! Awesome.

2 things

1) I think the roll might actually be 9 ft long instead of 10 ft. This does not affect you unless you specifically NEEDED 10 x 10 and 9 x 10 will not fit your need. If so, let me know.

2) I have THREE people already who have sent me money and I need to make sure I accomodate them first. I have to leave town today, will be back in late tomorrow night. At that time I will get some measured out and cut and see what I have left to work with and will post back here.

Thanks!

PostedNov 30, 2011 at 4:25 pm

Would it be fair in your opinion to give the people that have paid already and extra foot in length to compensate for the loss of the foot in width?

PostedDec 4, 2011 at 10:03 am

I wish I had seen this before I bought all that sil. I was wondering if you might still have enough for a 9×9 piece?

PostedDec 5, 2011 at 9:46 am

Patrick, Sarah, and Richard…. your tyvek is shipped and should be recceived possibly today or mid week.

I have enough left for about 3 more people who want a 9 x 9 piece, or 9 x 10. Paypal info is somemadhope82@yahoo.com. It will be about Wednesday / Thursday before I can ship it though. Also, considering the time involved in unrolling, cutting, and packaging….. I need about $13 per 9 x 10 piece to make it worthwhile to part this roll out. Thats shipping included. I still think thats super reasonable.

Adam Kramer BPL Member
PostedDec 8, 2011 at 12:30 pm

anthony, would take the last one if available. let me know. thanks! adam

PostedDec 11, 2011 at 7:51 pm

If there is any left I would be happy to buy it. I would take a 10×10, 10×9…whatever you have left. I just need a minimum of 7×9.

Please let me know. Thanks!

Gary Dunckel BPL Member
PostedDec 12, 2011 at 8:51 am

Anthony, I sent payment on Dec. 5, but I haven't heard from you. Please let me know what's going on.

Viewing 25 posts - 1 through 25 (of 31 total)
Loading...