Topic

Primaloft shorts side fastenings


Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Home Forums Gear Forums Make Your Own Gear Primaloft shorts side fastenings

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1279352
    Stephen M
    BPL Member

    @stephen-m

    Locale: Way up North

    Hi folks,

    I have a pair of old Primlaoft Trousers that I am attempting to turn in to knee length shorts, as they have full side parting zips I am looking at some method to fasten them.

    I have tried iron on Velcro with no success.

    Any ideas?

    Thanks,

    Stephen

    #1779577
    Clint Wayman
    Spectator

    @cwayman1

    Locale: East Tennessee, US

    Are you removing the zippers completely? If not, you could just add a small button/snap at the bottom of each leg — simple and effective.

    #1779582
    Stephen M
    BPL Member

    @stephen-m

    Locale: Way up North

    Hi,

    I am removing the zippers completely as the zip runs from bottom to top (Army Patagonia Micro puffs) if it was the other way round I do a bodge job on the bottom of the zips.

    I say 2 to 3 closures would be good as there is 1 press studs on top already.

    Cheers,

    Stephen

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Forum Posting

A Membership is required to post in the forums. Login or become a member to post in the member forums!

Get the Newsletter

Get our free Handbook and Receive our weekly newsletter to see what's new at Backpacking Light!

Gear Research & Discovery Tools


Loading...