Topic

ToastyFeet by PolarWrap

  • This topic is empty.
Viewing 19 posts - 1 through 19 (of 19 total)
PostedDec 17, 2006 at 5:46 pm

I just got mine in the mail. First use was last week in Smugglers Notch with 8" of snow and 30 degree temps, not much of a real test. I am looking forword to the promised warmth this winter when the temps in the Notch will be a more seasonable -20 degrees.

PostedDec 17, 2006 at 6:59 pm

Very interested. My cycling shoes have a metal cleat and that transfers heat fast…as in fast out of my foot.

David Lewis BPL Member
PostedDec 18, 2006 at 5:09 am

Cool… but I really want to know when we're going to be able to buy that Aerogel sleeping pad from POE! I can't wait for that. I wonder if it could be incorporated into clothing as well?

David Lewis BPL Member
PostedDec 18, 2006 at 2:55 pm

I emailed POE about their upcoming Aspen Aerogel sleeping pad and to my surprise… got a reply… same day!!! Sounds like it will be on the market really really soon!!!!

here is the email they sent me:

"We just got in our first run of pads last Friday. Depending on the dealers that have them on order we will be shipping them out. In Canada please visit our distributors website at http://www.vezar.ca. There is a dealer locator for Canada on there that you can use to find the product or get it ordered. If you can't find it up there then please try the Summit Hut at 1-800-499-8696. You can order from them and they will ship to Canada. The Hyper High Mountain item code is HMH72."

PostedDec 18, 2006 at 3:44 pm

According to Aspen Aerogels, it will appear in clothing. This is from their web site:

Now manufacturers of cold weather gear, apparel and footwear
are doing the same. Aspen Aerogels offers the opportunity to significantly upgrade the thermal
performance of these products in ways unavailable before. Plus, the structure and formulation of
Aspen Aerogels’ flexible aerogel insulations are incredibly waterproof, thin and compression
resistant. And, aerogel has good moisture vapor transmission while repelling liquid water. Aspen
Aerogels delivers these advantages:

* Maximum Insulation, Minimum Weight and Thickness
* Reduce Thickness, Increase Fashion and Design Elements
* No Loss of Performance Under Load
* Material Durability in Normal Wash/Dry Cycle
* Virtually No Loft Required

PostedDec 18, 2006 at 3:49 pm

Also just got them in the mail, but didn't bother to try them in this weekend's 50 F weather. Hopefully we'll have winter this winter.

PostedDec 18, 2006 at 3:57 pm

It would be interesting for someone to wear one in one shoe and a typical insole in the other shoe and then report back on the result. Craig

PostedDec 18, 2006 at 4:06 pm

Will try that Craig. I'll order a set up after the holidays. I don't want anything showing up here while we're out of town. Although my event mitts did arrive today :D

PostedDec 18, 2006 at 9:54 pm

In the name of science Christopher this test has to……no must be done LOL. MLD eVENT mitts, you lucky dog you. I missed out on ordering them this time but I hope to get them in the next batch.

PostedDec 19, 2006 at 9:34 am

Yes, Christopher, we will be waiting for that report on the insoles AND also looking for another thread reporting on the MLD event mitts.

With good fortune comes responsibility! ;-)

PostedDec 19, 2006 at 10:38 am

You are in luck. A snow storm is brewing today and tomorrow here and I may get the snowbike out. If so I'll put the event mitts through their first test. Wish I had the insoles already though!

PostedJan 28, 2007 at 9:23 am

I just did a dayhike at 6 F. My feet never felt cold through the bottom. So far, they're great.

PostedJan 28, 2007 at 10:58 pm

Several years ago I saw the first story on Aerogel. It looked like smoke more than solid.

If they make a mattress out of this stuff, say, bonded inside the top and bottom sheets, then how comfortable would one feel compared to the current foam? Would the mattress weigh less?
Will a new line of synthetic clothing & sleeping bags obsolete all other insulations?

Will manufacturers pair Aerogel with Cuben cloth for ultimate lightweight items?

Sounds almost too good to be true.

PostedJan 29, 2007 at 7:33 am

I used to work with aerogel for a living. It's wild stuff just to look at. I have a big chunk of it in a box that I bring out when I have guests over. It's a great conversation piece. We used to use it to make chrenkov counters (high energy particle detectors for particles travelling faster-than-light within the aerogel). It is very airy and super light and also a great insulator. It is rather firm, however, and more to the point very brittle. I would say it is "hard" and "rigid". It wouldn't take much to make a layer of insulation vastly superior to a typical closed sell pad, at lest I am betting, but it would not offer much comfort and I would imagine the lifetime of the sleeping pad would be limited. Then again there are always ways. I could imagine a sheet of this stuff made like "armor" quilted together so it's more flexible than a sheet.

I was thinking of trying to make a sleeping pad out of vermiculite (expanded mica) for a while now. It's also a great insulator and would be softish but of course after a few nights of use I would think the insulation would get compressed. Still, a "refillable" pad would be possible and vermiculite is very cheap.

Aerogel is very expensive, by the way, or at least it was when I was working with the stuff.

Dylan Skola BPL Member
PostedJan 29, 2007 at 11:05 am

This was posted here a while ago but this Italian company will sell you an aerogel-insulated jacket or parka for only 1500 euros (about $2000)! It looks like they use strategically-placed panels of the fabric form made by Aspen Aerogels. And it is still quite expensive. Various companies will sell you small samples for $25-40. Tempted to get a piece just to play with.

I wonder why the manufacturing cost is so high? The process as described in the Wikipedia didn’t sound too outrageous.

David Lewis BPL Member
PostedJan 31, 2007 at 3:24 pm

Pacific Outdoor Equipment has already made a camping mattress using aerogel… as I mentioned in my post above. As I also mentioned, it sounds like it will be available to buy soon.

The information about this pad is on THIS website… I think from the summer outdoor show. As I recall… it uses a layer of aerogel and a layer of foam.

Here is the link

PostedJan 2, 2010 at 2:58 pm

I'd be interested in trying out these insoles, but in addition to warmth, I really want to know how far these would go on a thru-hike.

PostedJan 2, 2010 at 8:45 pm

As David says/links to, POE made some aerogel pads quite some time ago. I have one, the AO/Mtn sleeping pad. It’s not light, but it worked as advertised. I could feel warmth below me when I slept on it. But it’s not quite thick enough for me, I’m old and my bones need some padding, so I use a NeoAir with a Ridgerest in winter.

If anyone wants the POE, I’d be happy to sell it. It’s in great condition. See my post here

Viewing 19 posts - 1 through 19 (of 19 total)
Loading...