Topic

Where to get nylon?

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
Hu Ai BPL Member
PostedJul 28, 2011 at 8:07 pm

I just bought a Rab top bag from the thread over in gear deals. The bag doesn't have a sleeve for a pad and I want to sew a few straps of a thin material like really thin nylon or cuben to the bottom to hold the pad in place. Does anyone have any extra scrap material they can sell to me (I need to make about 3 strips about 5×24"). Or alternatively does anyone know where the DYI folks buy it?

Hu Ai BPL Member
PostedAug 4, 2011 at 1:54 pm

Anyone out there have any suggestions or experience using 1.1 oz silnylon vs the momentum fabrics from Thru-hiker.com? I'm probably looking at Momentum 55.

PostedAug 4, 2011 at 2:06 pm

I would consider adding a small loop of grosgrain to both sides and then running something like the small z chord from zpacks through it to lash it to your pad. This would be lighter, easier, cheaper, and allow you to remove it if wanted.

PostedAug 4, 2011 at 4:31 pm

"I would consider adding a small loop of grosgrain to both sides and then running something like the small z chord from zpacks through it to lash it to your pad. This would be lighter, easier, cheaper, and allow you to remove it if wanted."

+1 on this idea. The golite quilts come with this arrangement and I find it works very well..

Hu Ai BPL Member
PostedAug 5, 2011 at 2:06 pm

Thanks for the idea – i think I'll give it a try

Hu Ai BPL Member
PostedAug 10, 2011 at 5:25 pm

Hm I don't see z-chord on zpacks website. Is that like bungie cord?

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...