Topic

Loose thread on Contrail; Need advice.

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedJun 15, 2011 at 4:06 pm

Hi,

I bought a used Contrail and I noticed that some of the stitching on the door is coming loose in the middle of the seam. Obviously I don't want it to continue to unravel. Can I just tack it with a bit of super glue? Will the glue stick to the silnylon at all?

Thanks,
Al

PostedJun 15, 2011 at 4:16 pm

If you can sew or know somebody who can…

I'd just start on one end of the seam where it's coming loose, backstitch over the seam a little ways, then sew down to the other end where it's coming loose, overlap it a little ways, then backstitch again to lock the seam.

Sew Here

I apologize for the primitive Paint skills.

Jerry Adams BPL Member
PostedJun 15, 2011 at 5:20 pm

I used to think it was some sort of reference to General Relativity

But then I had a seam that slowly ripped out but I just ignored it…

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...