Topic

steel cut oatmeal

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedAug 20, 2010 at 4:57 am

Does anyone know a practical way of making steel cut oatmeal (irish oatmeal) using a minimal amount of fuel. Normally at home takes about 20-40 minutes to cook.

Kattt BPL Member
PostedAug 20, 2010 at 4:59 am

The longet you can soak it, the less time it will need to cook.

PostedAug 20, 2010 at 6:04 am

Soak it overnight. Then all you have to do is heat it up and add your "extras" (raisins, maple syrup, etc.)!

PostedAug 23, 2010 at 10:40 am

I make it all the time at home by bringing water to a boil then adding the oatmeal and taking it off the heat. I don't heat the water after adding the oatmeal.

I do this before going to bed, and the oatmeal is done in the morning. I just warm it back up. I found the instructions for preparing it this way in an Irish cook book.

Prior to this I was soaking the oatmeal overnight in room temperature water, but still had to bring it to a boil and simmer it for a while to finish absorbing the water. I suspect it would taste uncooked too, but I never tasted it before cooking.

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...