Topic

pot thickness/weights

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
Dennis Park BPL Member
PostedApr 29, 2010 at 11:09 am

Anybody understand why pots tend to be either thicker or heavier when compared to similar metal bowls or cups of comparable/greater capacity?

As mentioned on another thread, for just boiling water, it seems more logical to use a lighter bowl/mug instead of a pot. This could lead to several ounces of weight savings in some cases. I assume there must be an advantage in the physical properties of heavier pots but would love to understand the differences.

PostedApr 29, 2010 at 12:47 pm

A heavier pot (of a given material) will take more energy to heat up from cold to a given temperature, but will also take longer to cool down. The net result is more even heat distribution over the area of the pot (ie it won't ONLY be hot right over the burner) which leads to more even cooking. Very important when doing any sort of gourmet "dry heat" cooking (including with small amounts of oil) but probably not super important to most backcountry meals. If you're doing things a lot more serious than just boiling water in it, then you're right, you may want to consider a heavier pot, but could probably still get by without.

James Naphas BPL Member
PostedApr 29, 2010 at 9:05 pm

Another thing that can drive up pot weight is non-stick coatings. The weight difference for an REI .9L Ti ware pot is around .7-.8 oz between the coated and uncoated versions. Given that this is a sub 5 oz pot worst case, this is pretty significant.

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...