What titanium pot is best for an alcohol stove that has side jets? I need a pot that has a diameter of 5 or more inches to maximize the efficency of the flame jets.
Topic
Alcohol stove + pot question
Become a member to post in the forums.
- This topic is empty.
efficiency!
um, you can check out the evernew titanium pots. I'm pretty sure REI sells there brand/version of them also.
The MSR Titan Kettle is 4.5 inches in diameter. It is a great little pot, but a little too small. I would look at the Evernew pots. Available at various places. TrailDesigns sells them through AntiGravityGear. I have had one I've used for ever. They are among the lightest and pretty reasonably priced for titanium.
http://www.traildesigns.com/evernew.html
-Mark
Claudia,
You’re probably not looking for this setup, since you mentioned a pot and 5+ inches diameter, but look HERE for another option. It works really well for small titanium pots/mugs, and you can’t beat the weight and size.
The Evernew pots might work; they're at least 2 ounces lighter than the Quick 1. I don't need a new stove, just a pot.
Claudia:
This one might fit your needs:
I have one of those squatty-shaped REI titanium pots, and it is pretty good… if you are looking for a squatty shaped pot purely because of the flame pattern on your burner. I think lots of backpackers prefer a tall shaped pot, so we must have more direct flame patterns.
–B.G.–
Doesn't anyone use a pepsi style stove with jets on the side?
Yes I do. But I will say that it spreads the flame pattern a bit wider than optimal for my Snow Peak Mini Solo pot so I don't use it much these days. I think most lightweight BPers now are using smaller sub 1-liter pots and the center burning alcohol stoves seem to mate to those a bit better.
"Doesn't anyone use a pepsi style stove with jets on the side?"
Yes, I do. I believe that is what the discussion is about. The jets shoot out about 1.5 to 2.0 inches on either side, so you are trying to find a pot that extends widely enough to catch most of that.
–B.G.–
Claudia,
See this thread to adapt a windscreen to help contain the heat to whatever pot you like. You just need to play with how many holes are needed at the top edge to keep from limiting the output.
Become a member to post in the forums.

