I have a GG SpinnTwinn I purchased recently that I would like to seam seal. What's the easiest way to seam seal it? Is it easier to purchase sealant or make my own and do it? Also, is the process used for spinnaker the same as for silnylon. I found a nice article on seam sealing here at BPL (http://www.backpackinglight.com/cgi-bin/backpackinglight/make_your_own_gear_sealing_silnylon_seams.html), but I wanted to make sure it could be used on spinnaker with the same results.
Topic
seam sealing
Become a member to post in the forums.
- This topic is empty.
Jeffrey,
Below is info copied and pasted from Gossamer Gear’s website concerning their SpinnTwinn. See info in >> <<.
Features
Lineloc buckles at each corner and the middle of both sides for easy line tensioning
High thread count spinnaker cloth – the lightest fully waterproof fabric available
>>Spinnaker cloth wil not stretch in windy or wet conditions so your pitch remains taut<<
Computer-designed catenary curves throughout
47 sq. ft. (4 sq. m.) of protected area – that’s almost 6 sq. ft. of shelter PER OUNCE of waterproof shelter!!
>>While some people have reported good results with leaving their SpinnTwinn™ unsealed, for maximum protection we recommend sealing the main seam with either Silnet or a homemade concoction of silicon sealant and mineral spirits.<<
Click on the link below to see the webpage where this info came from.
Hope this helps.
Party On ! 2010
Newton
Must have missed that when reading…thanks John.
Become a member to post in the forums.

