I have seen some discussion about the optimal direction of the seam on a flat tarp, but I could not find a clear answer to this question: Should the seam along the ridgeline? Or perpendicular to it? And why? Thanks !!!
Topic
Seam on flat tarp
Become a member to post in the forums.
- This topic is empty.
The seam can be perpendicular to the ridgeline as long as it's strong, such as using a French-felled seam. I sewed mine like this, and it has held up fine. The ridgeline has the most tension in the tarp, so this axis needs to be strong.
If you seam seal the ridge seam, it should add strength as well.
I've never heard of anyone having issues with the strength of a ridge seam on a flat silnylon tarp.
For Silnylon, a felled seam would be best, right?
Not to hijack this post, but it seemed the only recent relevant post. Howbout with a 9×7 .48 oz cuben flat tarp with a perpendicular seam. What are we talkin' for strength. One piece of double sided cuben tape and a piece of one sided tape for the top enough? Or does it need to be glued? Sewn? I can't decide what to do!
Doesn't matter for strength.
If your tarp setup allows water to pool over a seam, you could
get some leaks, otherwise it doesn't matter.
Become a member to post in the forums.

