Hey guys. I recently picked up a caldera cone for my heiny keg, and had a couple questions as to what height I should set the beer band when using the soda can stove vs the gram cracker esbit stove. I shot over my questions to Rand, and he promptly answered. I figured I'd share the info with you guys. I may be mistaken, but I think these numbers apply to other cones as well, and is not limited to the heiny keg
From Rand:
"So….here's the drill. The way we really measure these things is the distance from the ground to the bottom of the pot. What we like to get with the stove is 3" from the ground to the bottom of the keg…..but we can go 2.5" from the ground to the pot bottom with esbit. The best way to figure that out is to put the cone on the can, turn it upside down, lay a straightedge over the bottom of the cone, and measure from that to the bottom of the can.
Now, the problem you are going to have is that the band needs to be on one of the big "bumps" of the can so that it is big enough to grab the cone that is a fixed diameter. So, if 2.5 inches puts the band in one of the Heine can troughs, it might be too small to grab the cone and support it."

