Topic

cuben cozy

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
PostedApr 7, 2010 at 5:19 pm

hey everybody, i got some insulbright from a local fabric provider and was wondering if it would be ok to make an insulbright cozy for my ziplock bag but use cuben on the outside. Its the only fabric i have other than insulbright. The only issues i can think of would be condnesation, which may be solved with needle pokes in the body of the cuben. Opinions?

Roger Caffin BPL Member
PostedApr 7, 2010 at 5:34 pm

If you are going to poke holes in it, I can't see why you would bother with expensive Cuben???

Cheers

PostedApr 7, 2010 at 7:11 pm

The AGG cozies are made of mylar or whatever. They're definitely not breathable and I've never heard of any problems.

PostedApr 7, 2010 at 7:56 pm

The cozies weigh .8oz, are extremely efficient (little heat felt on the outside after a good 10 in, piping hot on the inside). I am very happy with them.

PostedApr 7, 2010 at 8:13 pm

The cuben seems to grip pretty strong where it was sewn, but i may add gorilla glue to the seams, not for sure yet. I can understand where sewing in cuben materials is not desired when you have a tarp, but it seems plenty strong enough for this application. Still debating the glue.

PostedApr 8, 2010 at 12:59 pm

I don't see why not. Yes, Insulbright does breathe – but we have used slnylon as an outer fabric before for our cozies.

You can use nearly any fabric for the outer.

Viewing 10 posts - 1 through 10 (of 10 total)
Loading...