Topic

Using MLD hipbelt pockets

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
PostedApr 7, 2010 at 7:52 am

I got a a large MLD hip belt pocket at the end of last season and used it for 3 or 4 hikes, but did not really like it at all.

The pocket was always flapping around, sliding up or down the hip belt strap, and just generally being a nuisance. I have an exodus which I was pairing the pocket with.

I'm wondering if the people that use these pockets could advise me on any tips they have found for keeping them stable.

EndoftheTrail BPL Member
PostedApr 7, 2010 at 8:30 am

For me, I always use my hip belt pockets and once I have them positioned "just so" — I've never needed to adjust again. Thus, I just sew a line along the top of the pocket to "anchor" it to the belt.

With only the top edge "anchored" — it's easy to flip the pockets up and out of the way when adjusting hipbelt. My one initial concern that the pockets my "flop around" when hiking downhill, etc. — turned out to be completely unfounded. No problems with flopping at all.

My pockets aren't MLD but the same should apply:

PostedApr 7, 2010 at 8:40 am

I use a #2 Nite Ize lightweight carabiner to attach the pocket to the bottom of the shoulder strap. Keeps the pocket in place with a multi-use item that can come in handy in a pinch! I also thread the hipbelt buckles (on my Prophet) through the small loop on the back of the pocket, very tight fit, which prevents the pocket from sliding off the hipbelt when unbuckled. Taken together, this works great for me.

PostedApr 7, 2010 at 10:47 am

I've used the MLD hipbelt pockets with my Revelation and they were okay but I like the MLD shoulder strap pockets much better. You may want to give these a try. They are a bit smaller, but they are lighter, easier to access and more secure. They are easy one hand operation.

PostedApr 7, 2010 at 11:34 am

Thanks for the tips so far. I never thought of just sewing (or using safety pins) to just attach the pocket to the hip belt.

I do use the small loop on the back of the pocket, which does keep it from falling off completely, but does not prevent the sliding. Though using the Nite Ize biner I have for my bear bag can solve this.

I guess I will see how safety pins/biner work and maybe check out the shoulder pockets. Thanks again for the great suggestions!

sheila o BPL Member
PostedApr 8, 2010 at 12:21 am

I use safety pins or velcro…works well. Love my pockets!

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...