Topic

WM Sleeping Bag: Zipper worn out

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
PostedApr 6, 2010 at 12:01 pm

I am currently hiking the AZT and unfortunately right in the middle of the hike the zipper slider of my WM Ultralite bag has worn out. I have seen this often in tent zippers, but never in a sleeping bag. Apparently the slider has worn out and it is very difficult the close the zipper any more.

I have done zipper slider exchanges on tents, but never on a sleeping bag. Unfortunately, WM does not give an email address to contact them and ask for a new slide.

So here is my question:

Where do I get a new zipper slider from for a WM Ultralite? (preferably a mailorder shop so I can have it shipped to me on the trail)

What is the exact code for the WM Ultralite zipper? The WM website just says #5 coil zipper, but the YKK code is more complex?

Has anyone done this repair before and can give me some advice?

Thanks for any help,

Christine

PostedApr 6, 2010 at 12:07 pm

How old is your Ultralite?

Does the zipper have a "separating" slider – two "bodies" that have to be mated to get things started, usually at the foot end. (Required to get to bag to zip together.)

What color, or do you care?

What town/city are you near, or will be near in 2 days?

Edit: I have a black non-separating I can send today.
Edit2: also, Googling 'zipper repair' shows walmart has a repair kit that looks like it contains a number of bodies.

PostedApr 6, 2010 at 12:37 pm

Thanks for the quick answer! I am even still on the internet! Here are the answers to your questions:

How old is your Ultralite?: I bought it in 2004.

Does the zipper have a "separating" slider – two "bodies" that have to be mated to get things started, usually at the foot end. (Required to get to bag to zip together.): Yes, I have a separating slider – and thank you for the explanation, now I know what that term means….

What color, or do you care? I don't care!

What town/city are you near, or will be near in 2 days? I will be in Tucson around April 12th.

Thanks for the tip with Walmart!

Christine

PostedApr 6, 2010 at 12:54 pm

I have a purple 2-body zipper set.
I can get it in the mail today.
Probably be anywhere Friday.

Are there other Post Office sites before Tucson?
It can be sent to Your Name, General Delivery, etc.

I think all you will need for the repair is a way to pry off the "stops" at the head end of the zipper (think small knife), and then needle and thread to sew on "stops" when you are done. Other that that, it is ridiculously easy to accomplish.

PostedApr 6, 2010 at 1:12 pm

Greg, I have just sent you a PM with my contact data. Thank you so much for your offer and advice. Hope that will solve the problem.
Christine

PostedApr 6, 2010 at 1:12 pm

Christine,
Your bag falls on a zipper change date.
Hang around for a moment and I post a photo on how to identify what you have.

g.

PostedApr 6, 2010 at 1:28 pm

Christine,
According to WM, the 2004 bag is a #5, but if the bag was old stock from a shop, it may be an #7. The way to tell is to look at the inside of the bottom slider.

ZipSize2

Here you can see "5CN".

Let me know.

BTW, WM would also be happy to send a slider. Your choice.
But not a problem for me if a #5 purple is ok with you.

PostedApr 6, 2010 at 1:38 pm

Greg, you are fantastic!!! I should have looked at the zipper myself before, but I just checked now and it says 5 CN like on your photo.
If you don't mind (I don't mind the color at all), please do send me the sliders anyways. I do not have cell phone reception here to call WM to have me send one.
Thank you so much for your help – I will happily hike on now. Your message came just in time.
Christine

PostedApr 6, 2010 at 1:43 pm

No problem. They will go out today.

Also, WM said you should try to gently squeeze (pliers) the two sides of the zipper together, test, and squeeze again. He said that will get you home in 90% of the cases.

In any event I will send the sliders.

Zip Repair

This is the 'stop' I mentioned. Take off both sides, slide the old sliders up and off, slide the new sliders on, paying attention to orientation and side, move them to the bottom, mate them, slide the other starter into the bodies, and zip. Sew some thread across the top of both sides to keep the slider from zinging off in the middle of the night.

Take care. Have fun.

Greg

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...