Topic

Take me down to zero

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
Jeff M. BPL Member
PostedMar 31, 2010 at 12:14 am

I want to get a clothing system that will take me down to around zero degrees while resting/sitting. What needs to be added to my current gear to accomplish this and do you have recommendations for pieces (the cheaper the better) to add?

The big gaping whole I see is a warm down parka. I was considering adding the new balance down jacket but I don't like that it doesn't have a hood. With regard to the parka, would it be better to have this piece fit under my shell or could it fit over it?

GEAR

Torso
– Pat Cap 3 base layer
– REI 200 weight fleece jacket
– MontBell Down Inner Parka
– MontBell Peak Shell

Bottoms
– Pat Cap 3 base layer
– Mid weight fleece pants
– REI convert. pants
– Marmot Precip shell pants

Other things
– MH Power stretch balaclava
– OR Arete gloves

Bob Gross BPL Member
PostedMar 31, 2010 at 12:26 am

You aren't too far off now.

Normally, all insulation layers go underneath the top shell. That is why, for winter use, a shell jacket is often purchased a half size large. That way, more stuff fits inside. The shell is supposed to stop all rain and wind, which makes the insulation job easier.

I prefer a shell parka with hood rather than a shell jacket without hood, but that is just me.
–B.G.–

PostedMar 31, 2010 at 3:44 am

I'd take a look at Eddie Bauer's First Ascent Peak XV down jacket (parka, actually). It's warm, with 850 fill power down, and with a DWR nylon outer shell. It should be good to at least 0F. For what it is, it's reasonably priced, and they often have sales.

My personal feeling about layering *for a down parka* is that you're not going to be wearing this if it's warm enough to be raining, so it doesn't need to go under a shell. Plus, it's got enough loft that you'd have to have a shell much larger than you'd want in order to accommodate it.

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...