Topic

Caldera UL compact

  • This topic is empty.
Viewing 13 posts - 1 through 13 (of 13 total)
PostedMar 26, 2010 at 1:21 pm

I have the caldera for my snowpeak mini solo-It's getting a bit battered now. I like the idea of the cone fitting inside my pot but is there a trade off in stability?- there's a lot of tufty grass where I cook. I don't really need the wood burning ability-I use alcohol and only boil water. i thought about the keg but I shove my pot around in my bag a lot. any feedback?

Gordon Smith BPL Member
PostedMar 26, 2010 at 8:23 pm

I have a Ti ULC cone for the Snow Peak 600 mug. It's not as stable as a the original Caldera Cone, but it's plenty stable:

Gordon

Gordon Smith BPL Member
PostedMar 27, 2010 at 6:57 am

Yeah thanks, I like it too. Russ & Rand do good work. I've been tinkering with my cook kit for several years, but I think I'm going to be happy with this kit for a while. Which just means its time to tinker with something else!

Gordon

Gordon Smith BPL Member
PostedMar 27, 2010 at 1:23 pm

Well, it's a small opening, but it should work. You can kind of see it in this photo:

Russ suggested I try burning wood in this cone, but I haven't yet and probably won't. I'm not that fond of the mess wood burning makes. You might shoot them an email, they may have run some wood burning tests on this ULC model by now.

Gordon

PostedMar 27, 2010 at 4:48 pm

Gordon,

In your second photo is that an additional wind screen around the pot? Does that come standard with the ULC setup? Thanks.

Gordon Smith BPL Member
PostedMar 28, 2010 at 1:49 am

Hi Jeff,
Yes and no. Yes it is an additional windscreen, but no it is not standard with all ULC setups. It was an add on for the SP600 ULC Cone to improve its efficiency. That mug has some peculiarities to it that required a custom ULC cone design. In my tests the windscreen increased efficiency by about 10-15 percent, so it’s a nice addition but not absolutely necessary. You’ll find lots more info in this thread.

Cheers!

PostedMar 28, 2010 at 1:02 pm

I too got one of the Compact UL's, first in aluminum (which did not work out) and now in Ti. I asked them to make me a screen too. Mine is for the SP Trek 700. So far I am pretty happy with it. I took it with me this past trip to try it in the snow, but forgot to bring stakes to put it together with (Doh). My aluminum snow stakes just wouldn't work. ;-)Ti ULC

PostedMar 29, 2010 at 1:04 am

do you have a weight for the two halves? I can't seem to find a weight on the trail designs site

Viewing 13 posts - 1 through 13 (of 13 total)
Loading...