Topic

stiffest CCF for a pack frame

  • This topic is empty.
Viewing 13 posts - 1 through 13 (of 13 total)
Konrad . BPL Member
PostedMar 24, 2010 at 8:24 pm

Hi, I have a frameless pack that I would like to add a CCF frame to. Off the top of your heads', anyone know any really good stiff CCFs? I don't want to fold it over many times… I just want to cut a single piece thats as long as the pack, and stick it into the hydration bladder slot. Thickness isnt that important, just stiffness. For reference, I find the foam material in a jam2 too flimsy, but I like the foam material in the REI flash 30. Thanks

Joe Clement BPL Member
PostedMar 24, 2010 at 8:45 pm

Cut a piece of Coroplast the same size as your foam, and add it to the foam.

Jim Colten BPL Member
PostedMar 24, 2010 at 8:45 pm

+1 cardboard

Some folks have been pleased with corrugated plastic signboard for this. It handles moisture better than cardboard.

edit: Joe beat me to it so make that a +1 on corrugated plastic signboard

Konrad . BPL Member
PostedMar 24, 2010 at 8:47 pm

i should be a lil more clear. I still want it to flex. So yeah, I dont think the Coroplast will work Joe. Thanks though
EDIT Ooooh nvm, I didnt realize what Coroplast really was…that may work well. You guys rock

PostedMar 24, 2010 at 9:00 pm

I have a Golite pack with a corrugated plastic framesheet, and it seems to work pretty well. Not dual-use, though.

Konrad . BPL Member
PostedMar 24, 2010 at 9:13 pm

Yeah, I'm still holding out for some foam options , because I like the idea of being able to use it to supplement my sleeping pad. Is corrugated plastic something I can find at local Home depots etc?

Joe Clement BPL Member
PostedMar 24, 2010 at 10:16 pm

I got the Coroplast for my son's Pinnacle (he ended up carrying as much as 35# in it) at a local sign company. I saw a tall, skinny sign for an event last month the other day, and almost stopped in the road to run snatch it off the wire holder.

Dale Wambaugh BPL Member
PostedMar 24, 2010 at 10:47 pm

Good ol' blue foam is the first thing that came to mind. The corrugated plastic sign board isn't a bad idea. Personally, I would fold a Therm-a-rest Prolite or a BPL Torsolite pad and inflate it to the right stiffness.

PostedMar 24, 2010 at 11:02 pm

Maybe cut a piece of foam and cardboard to the same desired size and duct-tape them together? Could do variations with two foams or two cardboards. Not the lightest option but I imagine it would be sufficiently stiff.

Good question though. Im surprised to have not seen this come up.

Lucas Boyer BPL Member
PostedMar 25, 2010 at 6:42 am

Those green army surplus store foam pads are rather stiff. Not sure how heavy they are though. I recently saw a lady w/ a whole stack of those things in her Jeep and almost stopped her to see where she got them and if she had one to spare.

PostedMar 25, 2010 at 10:34 am

I found one of those OD green military surplus pads in a hiker box in the PCT site in Castella. Ditched my Ridgerest and used the USGI pad until Manning, and extensively since. It is stiff, pretty light (at work now, can't recall the weight). Mine is tri-folded (overnight book metthod) and provides an excellent framesheet in a my frameless packs. I've since moved on to a Z-Lite and now a GG TorsoLite, but the USGI pad can still hang. Decently warm for a thin pad and resists flattening out about as well as any thin pad.

Ben BPL Member
PostedMar 25, 2010 at 10:42 am

The one I slept on last weekend. No idea how it ended up in my shed. Felt like it was made of nails.

Viewing 13 posts - 1 through 13 (of 13 total)
Loading...